I have put a Twinhan DTV card into my Mandrivia 2006 (with all updates) machine, and am having trouble configuring it/getting it recognized. I also have an analog TV card and a webcam in the /dev/video area.
dmesg says: dmesg |grep bttv bttv: driver version 0.9.15 loaded bttv: using 4 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 0000:02:0a.0, irq: 22, latency: 64, mmio: 0xf7efe000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00ff67ff [init] bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: miro: id=25 tuner=1 radio=no stereo=no bttv0: using tuner=1 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c: checking for TDA9887 @ 0x86... not found bttv0: registered device video1 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .. ok bttv: Bt8xx card found (1). bttv1: Bt878 (rev 17) at 0000:02:0c.0, irq: 20, latency: 64, mmio: 0xf7efc000 bttv1: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001 bttv1: using: Twinhan DST + clones [card=113,autodetected] bttv1: gpio: en=00000000, out=00000000 in=00f500ff [init] bttv1: using tuner=4 bttv1: add subdevice "dvb1" bttv0: PLL can sleep, using XTAL (28636363). bttv0: PLL: 28636363 => 35468950 .. ok slocate dvb1 gives: /sys/bus/bttv-sub/devices/dvb1 /sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.0/dvb1 /sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.0/dvb1/bus /sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.0/dvb1/power /sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.0/dvb1/power/state however, there is nothing under /dev (registered device in dmesg ?) Should I just symlink /sys/bus/bttv-sub/devices/dvb1 to /dev/video2? Should scantv be able to pick the new card up, and write out channel info, or do I need another utility (czap and associated utils seem popular, but how do I use them - they required something under /dev/dvb/adapterN/. - symlink again?) Any help appreciated! Hugh Dixon ____________________________________________________ Want to buy your Pack or Services from Mandriva? Go to http://store.mandriva.com Join the Club : http://www.mandrivaclub.com ____________________________________________________
