Hugh Dixon writes: > I have put a Twinhan DTV card into my Mandrivia 2006 (with all updates) > machine, and am having trouble configuring it/getting it recognized. > I also have an analog TV card and a webcam in the /dev/video area. > > dmesg says: > dmesg |grep bttv > bttv: driver version 0.9.15 loaded > bttv: using 4 buffers with 2080k (520 pages) each for capture > bttv: Bt8xx card found (0). > bttv0: Bt878 (rev 17) at 0000:02:0a.0, irq: 22, latency: 64, mmio: 0xf7efe000 > bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 > bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected] > bttv0: gpio: en=00000000, out=00000000 in=00ff67ff [init] > bttv0: i2c: checking for MSP34xx @ 0x80... not found > bttv0: miro: id=25 tuner=1 radio=no stereo=no > bttv0: using tuner=1 > bttv0: i2c: checking for MSP34xx @ 0x80... not found > bttv0: i2c: checking for TDA9875 @ 0xb0... not found > bttv0: i2c: checking for TDA7432 @ 0x8a... not found > bttv0: i2c: checking for TDA9887 @ 0x86... not found > bttv0: registered device video1 > bttv0: registered device vbi0 > bttv0: PLL: 28636363 => 35468950 .. ok > bttv: Bt8xx card found (1). > bttv1: Bt878 (rev 17) at 0000:02:0c.0, irq: 20, latency: 64, mmio: 0xf7efc000 > bttv1: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is > 1822:0001 > bttv1: using: Twinhan DST + clones [card=113,autodetected] > bttv1: gpio: en=00000000, out=00000000 in=00f500ff [init] > bttv1: using tuner=4 > bttv1: add subdevice "dvb1" > bttv0: PLL can sleep, using XTAL (28636363). > bttv0: PLL: 28636363 => 35468950 .. ok > > slocate dvb1 gives: > > /sys/bus/bttv-sub/devices/dvb1 > /sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.0/dvb1 > /sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.0/dvb1/bus > /sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.0/dvb1/power > /sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.0/dvb1/power/state > > however, there is nothing under /dev (registered device in dmesg ?) > > Should I just symlink /sys/bus/bttv-sub/devices/dvb1 to /dev/video2? > Should scantv be able to pick the new card up, and write out channel info, or > do I need another utility (czap and associated utils seem popular, but how do > I use them - they required something under /dev/dvb/adapterN/. - symlink > again?) > > Any help appreciated! > > Hugh Dixon > ____________________________________________________ > Want to buy your Pack or Services from Mandriva? > Go to http://store.mandriva.com > Join the Club : http://www.mandrivaclub.com > ____________________________________________________
I'm not going to be much help with this as I'm having a similar problem. I have just tried to get my usb DVD device working on 2006 but from a quick look at google I think you may need a dvb-kernel. You might also want to post this in the expert list as well. Guy Faulks the only person to enter the Parliament with honest intentions and he was going to blow them up ! --------------------------------------------- Free POP3 Email from www.Gawab.com Sign up NOW and get your account @gawab.com!! ____________________________________________________ Want to buy your Pack or Services from Mandriva? Go to http://store.mandriva.com Join the Club : http://www.mandrivaclub.com ____________________________________________________
