> -----Original Message----- > From: John Bowden [mailto:[EMAIL PROTECTED] > Sent: Friday, 31 March 2006 1:11 AM > To: [email protected] > Subject: [newbie] Re: digital TV card - mandrivia 2006 > > > Hugh Dixon writes: > > > I have put a Twinhan DTV card into my Mandrivia 2006 (with > all updates) machine, and am having trouble configuring > it/getting it recognized. > > I also have an analog TV card and a webcam in the /dev/video area. > > > > dmesg says: > > dmesg |grep bttv > > bttv: driver version 0.9.15 loaded > > bttv: using 4 buffers with 2080k (520 pages) each for capture > > bttv: Bt8xx card found (0). > > bttv0: Bt878 (rev 17) at 0000:02:0a.0, irq: 22, latency: 64, mmio: > > 0xf7efe000 > > bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is > > 11bd:0012 > > bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected] > > bttv0: gpio: en=00000000, out=00000000 in=00ff67ff [init] > > bttv0: i2c: checking for MSP34xx @ 0x80... not found > > bttv0: miro: id=25 tuner=1 radio=no stereo=no > > bttv0: using tuner=1 > > bttv0: i2c: checking for MSP34xx @ 0x80... not found > > bttv0: i2c: checking for TDA9875 @ 0xb0... not found > > bttv0: i2c: checking for TDA7432 @ 0x8a... not found > > bttv0: i2c: checking for TDA9887 @ 0x86... not found > > bttv0: registered device video1 > > bttv0: registered device vbi0 > > bttv0: PLL: 28636363 => 35468950 .. ok > > bttv: Bt8xx card found (1). > > bttv1: Bt878 (rev 17) at 0000:02:0c.0, irq: 20, latency: 64, mmio: > > 0xf7efc000 > > bttv1: detected: Twinhan VisionPlus DVB [card=113], PCI > subsystem ID > > is 1822:0001 > > bttv1: using: Twinhan DST + clones [card=113,autodetected] > > bttv1: gpio: en=00000000, out=00000000 in=00f500ff [init] > > bttv1: using tuner=4 > > bttv1: add subdevice "dvb1" > > bttv0: PLL can sleep, using XTAL (28636363). > > bttv0: PLL: 28636363 => 35468950 .. ok > > > > slocate dvb1 gives: > > > > /sys/bus/bttv-sub/devices/dvb1 > > /sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.0/dvb1 > > /sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.0/dvb1/bus > > /sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.0/dvb1/power > > /sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.0/dvb1/power/state > > > > however, there is nothing under /dev (registered device in dmesg ?) > > > > Should I just symlink /sys/bus/bttv-sub/devices/dvb1 to /dev/video2? > > Should scantv be able to pick the new card up, and write > out channel > > info, or do I need another utility (czap and associated utils seem > > popular, but how do I use them - they required something under > > /dev/dvb/adapterN/. - symlink again?) > > > > Any help appreciated! > > > > Hugh Dixon > > ____________________________________________________ > > Want to buy your Pack or Services from Mandriva? > > Go to http://store.mandriva.com > > Join the Club : http://www.mandrivaclub.com > > ____________________________________________________ > > I'm not going to be much help with this as I'm having a > similar problem. I have just tried to get my usb DVD device working on > 2006 but from a quick look at google I think you may need a > dvb-kernel. You might also want to post this in the expert > list as well. >
Thx, will give expert a go! I was assuming that if the device comes up in dmesg, then the kernel is OK. Hugh ____________________________________________________ Want to buy your Pack or Services from Mandriva? Go to http://store.mandriva.com Join the Club : http://www.mandrivaclub.com ____________________________________________________
