I've installed FreeBSD several times on my machine. The first time XFree86 worked fine, but after that, I always get this error: X connection to :0.0 broken (explicit kill or server shutdown). Some lines before it says something about fonts. Anyway, I changed the XF86Config file of the FreeBSD by the XF86Config of Mandrake Linux 8.0 (With the same version of XFree86), but now, I get the followin error (this is the servers output with the Mandrake configuration file): XFree86 Version 3.3.6 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: January 8 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 4.1.1-STABLE i386 [ELF] Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 1): NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256, GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati, sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_savage, s3_virge, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200, ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci, i810, i810-dc100, i810e, Voodoo Banshee, Voodoo3, smi, generic Using syscons driver with X support (version 2.0) (using VT number 9) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: keycodes: "xfree86" (**) XKB: types: "default" (**) XKB: compat: "default" (**) XKB: symbols: "us(pc105)" (**) XKB: geometry: "pc" (**) XKB: rules: "xfree86" (**) XKB: model: "pc105" (**) XKB: layout: "es" (**) Mouse: type: PS/2, device: /dev/psaux, buttons: 3 (**) Mouse: 3 button emulation (timeout: 50ms) (--) no ModulePath specified using default: /usr/X11R6/lib/modules glx-3.so: Unknown error loading module (**) SVGA: Graphics device ID: "SiS 620" (**) SVGA: Monitor ID: "monitor1" (--) SVGA: Mode "1024x768" needs hsync freq of 60.02 kHz. Deleted. (--) SVGA: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted. (--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted. (--) SVGA: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted. (--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted. (--) SVGA: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted. (--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted. (--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted. (--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. (--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted. (--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. (--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted. (--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. (**) FontPath set to "unix/:-1" Fatal server error: xf86OpenConsole: KDENABIO failed (Operation not permitted) When reporting a problem related to a server crash, please send the full server output, not just the last messages X connection to :0.0 broken (explicit kill or server shutdown). How can I fix this problem? May this error happen because of a bad fonts directory? _________________________________________________________________ Descargue GRATUITAMENTE MSN Explorer en http://explorer.msn.es/intl.asp _______________________________________________ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
