Hi all,
I have XF 4.1.0 on RedHat Linux 7.1, on a Dell Inspiron 7500. The
graphics card is an ATI 3D Rage Mobility. I have two monitors -- the LCD
panel on the laptop, and an external Viewsonic VA800. The LCD panel is a
Samsung capable of 1400x1050, and the VA800 is capable of 1280x1024.
When I use the standard VESA 1280x1024 mode for the VA800, there are a
few lines cut off at the bottom, while the horizontal is fine. So I set
up a special modeline for the VA800.
However, according to the XFree86.log file, the server changes my modeline!
I set up my modeline to:
Modeline "1280x1024va" 108 1280 1328 1440 1688
1024 1025 1028 1066 -hsync -vsync
However, the log shows this:
(II) ATI(0): Modeline "1280x1024va" 107.86 1280 1328 1456 1728
1024 1024 1027 1056 -hsync -vsync
Why is the server changing my modeline?
Thanks,
--Rob
(Full XF86Config-4 and XFree86.log attached)
XFree86 Version 4.1.0 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.4 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Nov 12 22:35:44 2001
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Anaconda Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "VA800"
(**) | |-->Device "ATI Rage Mobility"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:7100"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.4
XFree86 XInput driver : 0.2
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000213c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:04:0: chip 104c,ac1c card 4000,0000 rev 01 class 06,07,00 hdr 82
(II) PCI: 00:04:1: chip 104c,ac1c card 4800,0000 rev 01 class 06,07,00 hdr 82
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,80,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 00:08:0: chip 125d,1978 card 1028,009e rev 10 class 04,01,00 hdr 00
(II) PCI: 00:10:0: chip 11c1,0448 card 1668,2100 rev 01 class 07,80,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4c4d card 1028,009e rev 64 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x8c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0x00002000 - 0x000020ff (0x100) IX[B]
[1] -1 0x00002400 - 0x000024ff (0x100) IX[B]
[2] -1 0x00002800 - 0x000028ff (0x100) IX[B]
[3] -1 0x00002c00 - 0x00002cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xfc100000 - 0xfdffffff (0x1f00000) MX[B]
(II) Bus 1 prefetchable memory range:
(--) PCI:*(1:0:0) ATI Mach64 LM rev 100, Mem @ 0xfd000000/24, 0xfc100000/12, I/O @
0x2000/8
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xfc000000 - 0xfc0000ff (0x100) MX[B]
[1] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[2] -1 0xfc100000 - 0xfc100fff (0x1000) MX[B](B)
[3] -1 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[4] -1 0x00001800 - 0x000018ff (0x100) IX[B]
[5] -1 0x00001080 - 0x00001087 (0x8) IX[B]
[6] -1 0x00001400 - 0x000014ff (0x100) IX[B]
[7] -1 0x00001060 - 0x0000107f (0x20) IX[B]
[8] -1 0x00001090 - 0x0000109f (0x10) IX[B]
[9] -1 0x00002000 - 0x000020ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xfc000000 - 0xfc0000ff (0x100) MX[B]
[1] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[2] -1 0xfc100000 - 0xfc100fff (0x1000) MX[B](B)
[3] -1 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[4] -1 0x00001800 - 0x000018ff (0x100) IX[B]
[5] -1 0x00001080 - 0x00001087 (0x8) IX[B]
[6] -1 0x00001400 - 0x000014ff (0x100) IX[B]
[7] -1 0x00001060 - 0x0000107f (0x20) IX[B]
[8] -1 0x00001090 - 0x0000109f (0x10) IX[B]
[9] -1 0x00002000 - 0x000020ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xfc000000 - 0xfc0000ff (0x100) MX[B]
[6] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[7] -1 0xfc100000 - 0xfc100fff (0x1000) MX[B](B)
[8] -1 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[9] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0x00001800 - 0x000018ff (0x100) IX[B]
[12] -1 0x00001080 - 0x00001087 (0x8) IX[B]
[13] -1 0x00001400 - 0x000014ff (0x100) IX[B]
[14] -1 0x00001060 - 0x0000107f (0x20) IX[B]
[15] -1 0x00001090 - 0x0000109f (0x10) IX[B]
[16] -1 0x00002000 - 0x000020ff (0x100) IX[B](B)
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.0.2
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "pex5"
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension X3D-PEX
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "pex5"
(II) Reloading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Loading extension X3D-PEX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "xie"
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XIE
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 6.3.6
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.2
(II) ATI: ATI driver (version 6.3.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE (AGP)
(II) Primary Device is: PCI 01:00:0
(II) ATI: Candidate "Device" section "ATI Rage Mobility".
(II) ATI: Shared PCI/AGP Mach64 in slot 1:0:0 detected.
(II) ATI: Shared PCI/AGP Mach64 in slot 1:0:0 assigned to active "Device" section
"ATI Rage Mobility".
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xfc000000 - 0xfc0000ff (0x100) MX[B]
[6] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[7] -1 0xfc100000 - 0xfc100fff (0x1000) MX[B](B)
[8] -1 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[9] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0x00001800 - 0x000018ff (0x100) IX[B]
[12] -1 0x00001080 - 0x00001087 (0x8) IX[B]
[13] -1 0x00001400 - 0x000014ff (0x100) IX[B]
[14] -1 0x00001060 - 0x0000107f (0x20) IX[B]
[15] -1 0x00001090 - 0x0000109f (0x10) IX[B]
[16] -1 0x00002000 - 0x000020ff (0x100) IX[B](B)
(II) Loading sub module "atimisc"
(II) LoadModule: "atimisc"
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 6.3.6
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.4
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xfc000000 - 0xfc0000ff (0x100) MX[B]
[6] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[7] -1 0xfc100000 - 0xfc100fff (0x1000) MX[B](B)
[8] -1 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[9] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[10] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[11] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0x00001800 - 0x000018ff (0x100) IX[B]
[15] -1 0x00001080 - 0x00001087 (0x8) IX[B]
[16] -1 0x00001400 - 0x000014ff (0x100) IX[B]
[17] -1 0x00001060 - 0x0000107f (0x20) IX[B]
[18] -1 0x00001090 - 0x0000109f (0x10) IX[B]
[19] -1 0x00002000 - 0x000020ff (0x100) IX[B](B)
[20] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[21] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(==) ATI(0): Chipset: "ati".
(**) ATI(0): Depth 24, (--) framebuffer bpp 32
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) ATI(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) ATI(0): VESA BIOS detected
(II) ATI(0): VESA VBE Version 2.0
(II) ATI(0): VESA VBE Total Mem: 8128 kB
(II) ATI(0): VESA VBE OEM: ATI MACH64
(II) ATI(0): VESA VBE OEM Software Rev: 1.0
(II) ATI(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) ATI(0): VESA VBE OEM Product: MACH64RM
(II) ATI(0): VESA VBE OEM Product Rev: 01.00
(II) ATI(0): VESA VBE DDC supported
(II) ATI(0): VESA VBE DDC Level 2
(II) ATI(0): VESA VBE DDC transfer in appr. 2 sec.
(II) ATI(0): VESA VBE DDC read successfully
(II) ATI(0): Manufacturer: VSC Model: de00 Serial#: 10124
(II) ATI(0): Year: 2001 Week: 20
(II) ATI(0): EDID Version: 1.3
(II) ATI(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) ATI(0): Signal levels configurable
(II) ATI(0): Sync: Separate Composite SyncOnGreen
(II) ATI(0): Max H-Image Size [cm]: horiz.: 35 vert.: 28
(II) ATI(0): Gamma: 2.20
(II) ATI(0): DPMS capabilities: Off; RGB/Color Display
(II) ATI(0): First detailed timing is preferred mode
(II) ATI(0): GTF timings supported
(II) ATI(0): redX: 0.609 redY: 0.335 greenX: 0.306 greenY: 0.565
(II) ATI(0): blueX: 0.150 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
(II) ATI(0): Supported VESA Video Modes:
(II) ATI(0): 720x400@70Hz
(II) ATI(0): 640x480@60Hz
(II) ATI(0): 640x480@67Hz
(II) ATI(0): 640x480@72Hz
(II) ATI(0): 640x480@75Hz
(II) ATI(0): 800x600@56Hz
(II) ATI(0): 800x600@60Hz
(II) ATI(0): 800x600@72Hz
(II) ATI(0): 800x600@75Hz
(II) ATI(0): 832x624@75Hz
(II) ATI(0): 1024x768@60Hz
(II) ATI(0): 1024x768@70Hz
(II) ATI(0): 1024x768@75Hz
(II) ATI(0): 1280x1024@75Hz
(II) ATI(0): Manufacturer's mask: 0
(II) ATI(0): Supported Future Video Modes:
(II) ATI(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) ATI(0): #1: hsize: 640 vsize 640 refresh: 60 vid: 49
(II) ATI(0): Supported additional Video Mode:
(II) ATI(0): clock: 108.0 MHz Image Size: 345 x 276 mm
(II) ATI(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) ATI(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) ATI(0): Serial No: A08012010124
(II) ATI(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max
140 MHz
(II) ATI(0): Monitor name: VA800
(--) ATI(0): ATI 3D Rage Mobility graphics controller detected.
(--) ATI(0): Chip type 4C4D "LM", version 4, foundry TSMC, class 0, revision 0x01.
(--) ATI(0): AGP bus interface detected; block I/O base is 0x2000.
(--) ATI(0): ATI Mach64 adapter detected.
(--) ATI(0): Internal RAMDAC (subtype 1) detected.
(==) ATI(0): RGB weight 888
(==) ATI(0): Default visual is TrueColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using Mach64 accelerator CRTC.
(WW) ATI(0): Inconsistent panel horizontal dimension: 1400 and 1401.
(--) ATI(0): 1400x1050 panel (ID 11) detected.
(--) ATI(0): Panel model Samsung LTN150P1-L01.
(--) ATI(0): Panel clock is 107.859 MHz.
(II) ATI(0): Using digital flat panel interface.
(II) ATI(0): Storing hardware cursor image at 0xFD7FFC00.
(II) ATI(0): Using 8 MB linear aperture at 0xFD000000.
(!!) ATI(0): Virtual resolutions will be limited to 8191 kB
due to linear aperture size and/or placement of hardware cursor image area.
(II) ATI(0): Using Block 0 MMIO aperture at 0xFC100400.
(II) ATI(0): Using Block 1 MMIO aperture at 0xFC100000.
(==) ATI(0): Write-combining range (0xfd000000,0x800000)
(II) ATI(0): MMIO write caching enabled.
(--) ATI(0): 8192 kB of SGRAM (1:1) detected (using 8191 kB).
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(--) ATI(0): Internal programmable clock generator detected.
(--) ATI(0): Reference clock 29.500 MHz.
(II) ATI(0): Maximum clock: 230.00 MHz
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode)
(--) ATI(0): Virtual size is 1280x1024 (pitch 1280)
(**) ATI(0): Default mode "1280x1024": 107.9 MHz, 58.4 kHz, 53.9 Hz
(II) ATI(0): Modeline "1280x1024" 107.86 1280 1328 1456 1728 1024 1024 1027 1056
+hsync +vsync
(**) ATI(0): Mode "1280x1024va": 107.9 MHz, 58.4 kHz, 53.9 Hz
(II) ATI(0): Modeline "1280x1024va" 107.86 1280 1328 1456 1728 1024 1024 1027 1056
-hsync -vsync
(--) ATI(0): Display dimensions: (35, 28) cm
(--) ATI(0): DPI set to (92, 92)
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xfc100000 - 0xfc100fff (0x1000) MS[B]
[1] 0 0xfd000000 - 0xfdffffff (0x1000000) MS[B]
[2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0xfc000000 - 0xfc0000ff (0x100) MX[B]
[8] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[9] -1 0xfc100000 - 0xfc100fff (0x1000) MX[B](B)
[10] -1 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[11] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[12] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[13] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[14] 0 0x00002000 - 0x000020ff (0x100) IS[B]
[15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0x00001800 - 0x000018ff (0x100) IX[B]
[18] -1 0x00001080 - 0x00001087 (0x8) IX[B]
[19] -1 0x00001400 - 0x000014ff (0x100) IX[B]
[20] -1 0x00001060 - 0x0000107f (0x20) IX[B]
[21] -1 0x00001090 - 0x0000109f (0x10) IX[B]
[22] -1 0x00002000 - 0x000020ff (0x100) IX[B](B)
[23] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[24] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) ATI(0): Write-combining range (0xfd000000,0x800000)
(II) ATI(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
20 128x128 slots
5 256x256 slots
(==) ATI(0): Backing store disabled
(==) ATI(0): Silken mouse enabled
(**) Option "dpms"
(**) ATI(0): DPMS enabled
(WW) ATI(0): Option "Display" is not used
(WW) ATI(0): Option "SyncOnGreen" is not used
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "PS/2"
(**) Mouse0: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/psaux"
(==) Mouse0: Buttons: 3
(**) Option "Emulate3Buttons" "yes"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) Open APM successful
(==) ATI(0): Write-combining range (0xfd000000,0x800000)
(**) ATI(0): DPMS enabled
# File generated by anaconda.
Section "ServerLayout"
Identifier "Anaconda Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
#FontPath "/usr/X11R6/lib/X11/fonts/TrueType"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "fbdevhw"
Load "pex5"
Load "glx"
Load "pex5"
Load "record"
Load "xie"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
# Option "AutoRepeat" "500 5"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Option "Protocol" "Xqueue"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:nocaps"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
#Option "XkbVariant" ""
#Option "XkbOptions" ""
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-100
VertRefresh 50-100
# -- 1400x1050 --
# 1400x1050 @ 60Hz, 65.8 kHz hsync
Modeline "1400x1050" 129 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 70Hz, 76.8 kHz hsync
Modeline "1400x1050" 151 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 75Hz, 82.3 kHz hsync
Modeline "1400x1050" 162 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 85Hz, 93.2 kHz hsync
Modeline "1400x1050" 184 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
Modeline "1400x1050dell" 155 1400 1464 1784 1912
1050 1052 1064 1090 -hsync -vsync
EndSection
Section "Monitor"
Identifier "VA800"
VendorName "Viewsonic"
ModelName "VA800"
HorizSync 30-82
VertRefresh 50-75
Option "SyncOnGreen"
Option "DPMS"
Modeline "1280x1024va" 108 1280 1328 1440 1688
1024 1025 1028 1066 -hsync -vsync
EndSection
Section "Device"
# no known options
Identifier "ATI Rage Mobility"
Driver "ati"
VendorName "ATI"
BoardName "ATI Rage Mobility"
Option "Display" "Mirror"
BusID "1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "ATI Rage Mobility"
Monitor "VA800"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1280x1024" "1280x1024va"
# Modes "1400x1050dell"
EndSubsection
EndSection
Section "DRI"
Mode 0666
EndSection
