Hi all
I ve just installed the Debian Multimedia Distrib
working with kernel 2.4.5 and XF 4.1 but the Xserver
doesn t seems to support my video card (cirrus logic
5446 PCI). I ve tried the vga and cirrus_alpine driver
but none of them seems to work and I got the following
log:
-------------------------------------------------------
XFree86 Version 4.1.0 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your
card is
newer than the above date, look for a newer version
before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.5-lowlat i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Sep
24 10:36:30 2001
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==)
default setting,
(++) from command line, (!!) notice, (II)
informational,
(WW) warning, (EE) error, (NI) not
implemented, (??) unknown.
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "MyMonitor"
(**) | |-->Device "MyCard"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc101"
(**) XKB: model: "pc101"
(**) Option "XkbLayout" "fr"
(**) XKB: layout: "fr"
(**) Option "XkbVariant" "french"
(**) XKB: variant: "french"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(WW) Cannot open APM
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.4
XFree86 XInput driver : 0.2
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000,
mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,5600 card 0000,0000 rev
11 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1039,5513 card 1039,5513 rev
d0 class 01,01,80 hdr 80
(II) PCI: 00:01:0: chip 1039,0008 card 0000,0000 rev
01 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 1039,0009 card 0000,0000 rev
00 class ff,00,00 hdr 80
(II) PCI: 00:02:0: chip 1039,0001 card 0000,0000 rev
00 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 1106,3065 card 1186,1400 rev
43 class 02,00,00 hdr 00
(II) PCI: 00:0b:0: chip 1013,00b8 card 0000,0000 rev
45 class 03,00,00 hdr 00
(II) PCI: 01:00:0: chip 1039,6326 card 0000,0000 rev
0b class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL:
0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1: bridge is at (0:1:0), (0,-1,0), BCTRL:
0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x06
(VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xdfe00000 - 0xdfefffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xdac00000 - 0xdbcfffff (0x1100000) MX[B]
(--) PCI:*(0:11:0) Cirrus Logic GD5446 rev 69, Mem @
0xdc000000/25, 0xeffff000/12, 0xefffe000/12, BIOS @
0xeffe0000/15
(--) PCI: (1:0:0) SiS 6326 rev 11, Mem @
0xdb000000/23, 0xdfef0000/16, I/O @ 0xcc00/7, BIOS @
0xdfee0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xefffdf00 - 0xefffdfff (0x100) MX[B]
[1] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
[2] -1 0 0xeffe0000 - 0xeffe7fff (0x8000) MX[B](B)
[3] -1 0 0xefffe000 - 0xefffefff (0x1000) MX[B](B)
[4] -1 0 0xeffff000 - 0xefffffff (0x1000) MX[B](B)
[5] -1 0 0xdc000000 - 0xddffffff (0x2000000) MX[B](B)
[6] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B]
[7] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[8] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[9] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[10] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[11] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
(II) Inactive PCI resource ranges:
[0] -1 0 0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
[1] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[2] -1 0 0xdb000000 - 0xdb7fffff (0x800000) MX[B](B)
[3] -1 0 0x0000cc00 - 0x0000cc7f (0x80) IX[B](B)
(II) Active PCI resource ranges after removing
overlaps:
[0] -1 0 0xefffdf00 - 0xefffdfff (0x100) MX[B]
[1] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
[2] -1 0 0xeffe0000 - 0xeffe7fff (0x8000) MX[B](B)
[3] -1 0 0xefffe000 - 0xefffefff (0x1000) MX[B](B)
[4] -1 0 0xeffff000 - 0xefffffff (0x1000) MX[B](B)
[5] -1 0 0xdc000000 - 0xddffffff (0x2000000) MX[B](B)
[6] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B]
[7] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[8] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[9] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[10] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[11] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
(II) Inactive PCI resource ranges after removing
overlaps:
[0] -1 0 0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
[1] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[2] -1 0 0xdb000000 - 0xdb7fffff (0x800000) MX[B](B)
[3] -1 0 0x0000cc00 - 0x0000cc7f (0x80) IX[B](B)
(II) OS-reported resource ranges after removing
overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xefffdf00 - 0xefffdfff (0x100) MX[B]
[6] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
[7] -1 0 0xeffe0000 - 0xeffe7fff (0x8000) MX[B](B)
[8] -1 0 0xefffe000 - 0xefffefff (0x1000) MX[B](B)
[9] -1 0 0xeffff000 - 0xefffffff (0x1000) MX[B](B)
[10] -1 0 0xdc000000 - 0xddffffff (0x2000000)
MX[B](B)
[11] -1 0 0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
[12] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[13] -1 0 0xdb000000 - 0xdb7fffff (0x800000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B]
[17] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[18] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[19] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[20] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[22] -1 0 0x0000cc00 - 0x0000cc7f (0x80) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading
/usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading
/usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading
/usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.1.9
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font FreeType
(II) LoadModule: "cirrus_alpine"
(II) Loading
/usr/X11R6/lib/modules/drivers/cirrus_alpine.o
(II) Module cirrus_alpine: vendor="The XFree86
Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.2
(EE) No drivers available.
Fatal server error:
no screens found
-------------------------------------------------------
It seems to be the screen def that is wrong but it is
defined... Here's my .conf:
-------------------------------------------------------
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any
person obtaining a
# copy of this software and associated documentation
files (the "Software"),
# to deal in the Software without restriction,
including without limitation
# the rights to use, copy, modify, merge, publish,
distribute, sublicense,
# and/or sell copies of the Software, and to permit
persons to whom the
# Software is furnished to do so, subject to the
following conditions:
#
# The above copyright notice and this permission
notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY
OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES
OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the
XFree86 Project shall
# not be used in advertising or otherwise to promote
the sale, use or other
# dealings in this Software without prior written
authorization from the
# XFree86 Project.
#
#
**********************************************************************
# Refer to the XF86Config(4/5) man page for details
about the format of
# this file.
#
**********************************************************************
#
**********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
#
**********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and
disables
# initialisation of the XFree86-DGA extension within
that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't
initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
# Load "glx"
EndSection
#
**********************************************************************
# Files section. This allows default font and rgb
paths to be set
#
**********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the
name of the
# file minus the extension (like ".txt" or ".db").
There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are
concatenated together),
# as well as specifying multiple comma-separated
entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and
emacs, Mosaic or other
# programs take long to start up, try moving the Type1
and Speedo directory
# to the end of this list (or comment them out).
#
# FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath
"/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath
"/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown
here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
#
**********************************************************************
# Server flags section.
#
**********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot
where a signal is
# received. This may leave the console in an unusable
state, but may
# provide a better stack trace in the core dump to aid
in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server
abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the
<Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key
events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune
client. With
# it the client can still run and fetch card and
monitor attributes,
# but it will not be allowed to change them. If it
tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local
xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the
input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local
client to
# change the keyboard or mouse settings (currently
only xset).
# Option "AllowNonLocalModInDev"
EndSection
#
**********************************************************************
# Input devices
#
**********************************************************************
#
**********************************************************************
# Core keyboard's InputDevice section
#
**********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it
defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not
Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled
(eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard,
modify the
# lines below (which are the defaults). For example,
for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can
use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout
setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your
capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "fr"
Option "XkbVariant" "french"
EndSection
#
**********************************************************************
# Core Pointer's InputDevice section
#
**********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/psaux"
# When using XQUEUE, comment out the above two lines,
and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech
mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft
mice
# Emulate3Timeout is the timeout in milliseconds
(default is 50ms)
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech
mice
Option "ChordMiddle"
EndSection
#
**********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for
example only. Refer
# to the XF86Config man page for a description of the
options.
#
**********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
**********************************************************************
# Monitor section
#
**********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "MyMonitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete
values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO
YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync
frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync
frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of
discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO
YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 66
EndSection
#
**********************************************************************
# Graphics device section
#
**********************************************************************
# Any number of graphics device sections may be
present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can
be used to override
# the driver's chipset detection, and should not
normally be specified.
# Chipset "generic"
# The Driver line must be present. When using
run-time loadable driver
# modules, this line instructs the server to load the
specified driver
# module. Even when not using loadable driver
modules, this line
# indicates which driver should interpret the
information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly
multiple devices
# this section is intended for. When this line isn't
present, a device
# section can only match up with the primary video
device. For PCI
# devices a line like the following could be used.
This line should not
# normally be included unless there is more than one
video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xf86config:
Section "Device"
Identifier "MyCard"
Driver "cirrus_alpine"
# unsupported card
#VideoRam 1024
# Use Option "no_bitblt" if you have graphics
problems. If that fails
# try Option "noaccel".
# Refer to /usr/X11R6/lib/doc/README.cirrus.
# To allow linear addressing, uncomment the Option
line and the
# address that the card maps the framebuffer to.
# Insert Clocks lines here if appropriate
EndSection
#
**********************************************************************
# Screen sections
#
**********************************************************************
# Any number of screen sections may be present. Each
describes
# the configuration of a single screen. A single
specific screen section
# may be specified from the X server command line with
the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "MyCard"
Monitor "MyMonitor"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "640x480" "800x600" "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "640x480"
ViewPort 0 0
EndSubsection
EndSection
#
**********************************************************************
# ServerLayout sections.
#
**********************************************************************
# Any number of ServerLayout sections may be present.
Each describes
# the way multiple screens are organised. A specific
ServerLayout
# section may be specified from the X server command
line with the
# "-layout" option. In the absence of this, the first
section is used.
# When now ServerLayout section is present, the first
Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name,
and optionally
# the relative position of other screens. The four
names after
# primary screen name are the screens to the top,
bottom, left and right
# of the primary screen. In this example, screen 2 is
located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice
section name and
# optionally some options to specify the way the
device is to be
# used. Those options include "CorePointer",
"CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
-------------------------------------------------------
Does someone have an idea??
thx by advance
Seb ([EMAIL PROTECTED])
___________________________________________________________
Do You Yahoo!? -- Un e-mail gratuit @yahoo.fr !
Yahoo! Courrier : http://fr.mail.yahoo.com
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
