Oh Damn, good point! -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Sprague, IT3 Sent: Friday, October 12, 2001 1:48 AM To: '[EMAIL PROTECTED]' Subject: RE: [Newbie]Problem with Virtual Console (Text)
Are you using SuSE? If so, they use a different numbering scheme. I don't remember it exactly, but 2 maps to everyone else's 3, and 3 to everyone else's 5... -----Original Message----- From: Luiz Emediato [mailto:[EMAIL PROTECTED]] Sent: Thursday, October 11, 2001 9:04 PM To: [EMAIL PROTECTED] Subject: RE: [Newbie]Problem with Virtual Console (Text) Hi Kasei and Cary, Using the command grep :initdefaut: /etc/inittab I got: id:2:initdefault Why is this not 5 or 3 ? What is wrong ? Thanks Luiz >From: Kasei <[EMAIL PROTECTED]> >Reply-To: [EMAIL PROTECTED] >To: [EMAIL PROTECTED] >Subject: RE: [Newbie]Problem with Virtual Console (Text) >Date: Thu, 11 Oct 2001 01:18:33 +0200 > >Well, one way to do this is typing /sbin/telinit 3 at the shell as root... >and solving the problem before jumping to the desired runlevel > >At 14:41 10/10/2001 -0400, you wrote: >>Neither one, You must this at a root prompt: >>grep :initdefault; /etc/inittab >>you should get this: >>id:5:initdefault: > >you only have to change the 5 to 3. Anyway, if you go to the directory of >that runlevel (/etc/rc3.d for runlevel 3, /etc/rc5.d for runlevel 5, and so >on...), you may try to remove any entry that could be suspicious of >starting the x services. > >>If the run level is different like 3, then your okay. To change this run >>linuxconfig or use a text editor and edit the /etc/inittab file. :o) >>I hope this helps you, because I am still learning this "nix" stuff too! >>Cary >> >>-----Original Message----- >>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On >>Behalf Of Luiz Emediato >>Sent: Wednesday, October 10, 2001 11:25 AM >>To: [EMAIL PROTECTED] >>Subject: RE: [Newbie]Problem with Virtual Console (Text) >> >> >>Hi Cary, >> >>How do I change boot mode to 3 ? >>Is it vga=3 on lilo.conf ? >> >>TIA, >>Luiz >> >> >> >From: "Cary Pembleton" <[EMAIL PROTECTED]> >> >Reply-To: [EMAIL PROTECTED] >> >To: <[EMAIL PROTECTED]> >> >Subject: RE: [Newbie]Problem with Virtual Console (Text) >> >Date: Tue, 9 Oct 2001 09:28:48 -0400 >> > >> >XFree86 X Servers and XConfig are going to change your Boot Mode to 5. >>You >> >will need to change this back to 3. This will correct your issue. Then >>if >> >you decide to run XConfig again, choose a lower frequency rate monitor. >> > >> >-----Original Message----- >> >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On >> >Behalf Of Luiz Emediato >> >Sent: Monday, October 08, 2001 9:24 PM >> >To: [EMAIL PROTECTED] >> >Subject: [Newbie]Problem with Virtual Console (Text) >> > >> > >> >Hi there, >> > >> >I installed Debian-Potato 2.2r2, Kernel 2.2.18pre21, and after using >> >anXious to configure X-server 3.3.6 I can not get virtual consoles >>F1-F6 >> >in >> >TEXT MODE anymore. Switching to F1 for example image is completely nuts. >>It >> >seems to be out of correct frequency. >> >So, I decided to remove XF86Config and reboot so that everything >> >goes back to normal. But in this case, I can not get X running, >>obviously. >> >Does anyone know exactly what is going on with XF86Config ? >> >Why does it mess up with virtual TEXT mode console (F1-F6) ? >> >There are copies of X -probeonly and XF86Config file attached below. >> >Thanks in advance, >> > Luiz >> > >-----------------------XFree86 -probeonly--------------------- >> > >XFree86 Version 3.3.6 / X Window System >> > >(protocol Version 11, revision 0, vendor release 6300) >> > >Release Date: January 8 2000 >> > > If the server is older than 6-12 months, or if your card is newer >> > > than the above date, look for a newer version before reporting >> > > problems. (see http://www.XFree86.Org/FAQ) >> > >Operating System: Linux 2.2.14-va.4.4-i586 i686 [ELF] >> > >Configured drivers: >> > > SVGA: server for SVGA graphics adaptors (Patchlevel 1): >> > > NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2, >> > > RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256, >> > > GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i, >> >ET4000W32i_rev_b, >> > > ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, >>ET4000W32p_rev_b, >> > > ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, >>pvga1, >> > > wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, >>r128, >> > >ati, >> > > sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597, >> > > sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, >> >tvga8200lx, >> > > tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, >>tvga9000, >> > > tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, >> > >tgui9420dgi, >> > > tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, >>tgui9682, >> > > tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, >> > > cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, >> >cyberblade, >> > > clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, >> >clgd5430, >> > > clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, >> >clgd5465, >> > > clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, >> >clgd7543, >> > > clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, >> > >mga2064w, >> > > mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, >> >oti067, >> > > oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, >> >ali2308, >> > > ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, >> > >ark1000pv, >> > > ark2000pv, ark2000mt, mx, realtek, s3_savage, s3_virge, AP6422, >> >AT24, >> > > AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, >> > > ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, >> > > ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200, >> > > ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, >> > >i740_pci, >> > > i810, i810-dc100, i810e, Voodoo Banshee, Voodoo3, smi, generic >> > >(using VT number 7) >> > > >> > >XF86Config: /usr/X11R6/lib/X11/XF86Config >> > >(**) stands for supplied, (--) stands for probed/default values >> > >(**) XKB: keymap: "xfree86(en_US)" (overrides other XKB settings) >> > >(**) Mouse: type: microsoft, device: /dev/mouse, baudrate: 1200 >> > >(**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms) >> > >(**) SVGA: Graphics device ID: "My Video Card" >> > >(**) SVGA: Monitor ID: "My Monitor" >> > >(--) SVGA: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted. >> > >(--) SVGA: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted. >> > >(--) SVGA: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted. >> > >(--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted. >> > >(--) SVGA: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted. >> > >(--) SVGA: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted. >> > >(--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted. >> > >(--) SVGA: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted. >> > >(--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted. >> > >(--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted. >> > >(--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted. >> > >(--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted. >> > >(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted. >> > >(--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted. >> > >(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. >> > >(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted. >> > >(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted. >> > >(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted. >> > >(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted. >> > >(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted. >> > >(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted. >> > >(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted. >> > >(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. >> > >(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted. >> > >(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. >> > >(--) SVGA: Mode "832x624" needs hsync freq of 50.00 kHz. Deleted. >> > >(**) FontPath set to >> > >> >"/usr/lib/X11/fonts/misc/:unscaled,/usr/lib/X11/fonts/cyrillic/:unscaled,/u >> >sr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/l >>i >> >b/X11/fonts/Type1/,/usr/lib/X11/fonts/Speedo/,/usr/lib/X11/fonts/misc/,/usr >>/ >> >lib/X11/fonts/cyrillic/,/usr/lib/X11/fonts/75dpi/,/usr/lib/X11/fonts/100dpi >>/ >> >" >> > >(--) SVGA: chipset: oti077 >> > >(**) SVGA: videoram: 1024k >> > >(--) SVGA: clocks: 25.25 28.32 65.14 44.97 14.16 18.18 40.12 >> >36.35 >> > >(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666 >> > >(--) SVGA: Maximum allowed dot-clock: 80.000 MHz >> > >(**) SVGA: Mode "800x600": mode clock = 40.000, clock used = 40.120 >> > >(--) SVGA: Virtual resolution set to 800x600 >> > >(--) SVGA: SpeedUp code selection modified because virtualX != 1024 >> > > >> > >----------------------XF86Config------------------------- >> > > >> > ># File generated by anXious - the Debian X Configuration Tool >> > ># anXious and xviddetect are (c) 2000 Randolph Chung >><[EMAIL PROTECTED]> >> > > >> > ># Suggestions and bug reports about this tool should be sent to >> > ># [EMAIL PROTECTED] >> > > >> > ># >> > >> >*************************************************************************** >> > ># Refer to the XF86Config(4/5) man page for details about the format >>of >> > ># this file. A more thoroughly commented version of this configuration >> > ># file can be found in >> >/usr/share/doc/xserver-common/examples/XF86Config.eg >> > ># >> > >> >*************************************************************************** >> > > >> > >Section "Files" >> > > RgbPath "/usr/X11R6/lib/X11/rgb" >> > > FontPath "/usr/lib/X11/fonts/misc/:unscaled" >> > > FontPath "/usr/lib/X11/fonts/cyrillic/:unscaled" >> > > FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" >> > > FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" >> > > FontPath "/usr/lib/X11/fonts/Type1/" >> > > FontPath "/usr/lib/X11/fonts/Speedo/" >> > > FontPath "/usr/lib/X11/fonts/misc/" >> > > FontPath "/usr/lib/X11/fonts/cyrillic/" >> > > FontPath "/usr/lib/X11/fonts/75dpi/" >> > > FontPath "/usr/lib/X11/fonts/100dpi/" >> > > ModulePath "/usr/X11R6/lib/modules" >> > >EndSection >> > > >> > ># Section "Module" >> > ># Load "xf86Jstk.so" >> > ># EndSection >> > > >> > >Section "ServerFlags" >> > ># NoTrapSignals >> > ># DontZap >> > ># DontZoom >> > ># DisableVidModeExtension >> > ># AllowNonLocalXvidtune >> > ># DiableModInDev >> > ># AllowNonLocalModInDev >> > >EndSection >> > > >> > >Section "Keyboard" >> > > Protocol "Standard" >> > ># To disable the XKEYBOARD extension, uncomment XkbDisable. >> > ># XkbDisable >> > > >> > ># To customise the XKB settings to suit your keyboard, modify the >> > ># lines below (which are the defaults). For example, for a non-U.S. >> > ># keyboard, you will probably want to use: >> > ># XkbModel "pc102" >> > ># If you have a US Microsoft Natural keyboard, you can use: >> > ># XkbModel "microsoft" >> > ># >> > ># Then to change the language, change the Layout setting. >> > ># For example, a german layout can be obtained with: >> > ># XkbLayout "de" >> > ># or: >> > ># XkbLayout "de" >> > ># XkbVariant "nodeadkeys" >> > ># if you'd like to switch the positions of your capslock and >> > ># control keys, use: >> > ># XkbOptions "ctrl:swapcaps" >> > > >> > ># These are the default XKB settings for XFree86 >> > ># XkbRules "xfree86" >> > ># XkbModel "pc101" >> > ># XkbLayout "us" >> > ># XkbVariant "" >> > ># XkbOptions "" >> > > >> > > XkbKeymap "xfree86(en_US)" >> > > >> > ># AutoRepeat 500 30 >> > ># LeftAlt Meta >> > ># RightAlt Meta >> > ># ScrollLock Compose >> > ># RightCtl Control >> > ># XkbKeycodes "xfree86" >> > ># XkbTypes "default" >> > ># XkbCompat "default" >> > ># XkbSymbols "us(pc101)" >> > ># XkbGeometry "pc" >> > ># XkbRules "xfree86" >> > ># XkbModel "pc101" >> > ># XkbLayout "us" >> > > >> > >EndSection >> > > >> > >Section "Pointer" >> > ># Protocol "PS/2" >> > ># Device "/dev/mouse" >> > > Protocol "microsoft" >> > > Device "/dev/mouse" >> > > Emulate3Buttons >> > >EndSection >> > > >> > >Section "Monitor" >> > > Identifier "My Monitor" >> > > VendorName "Unknown" >> > > ModelName "Unknown" >> > > >> > > HorizSync 31.5-48.5 >> > > VertRefresh 50-90 >> > > >> > ># This is a set of standard mode timings. Modes that are out of >>monitor >> > >spec >> > ># are automatically deleted by the server (provided the HorizSync and >> > ># VertRefresh lines are correct), so there's no immediate need to >> > ># delete mode timings (unless particular mode timings don't work on >>your >> > ># monitor). With these modes, the best standard mode that your monitor >> > ># and video card can support for a given resolution is automatically >> > ># used. >> > > >> > ># Start of generated XFree86 Modelines >> > >Modeline "640x480" 37.44 >>640 656 720 832 480 480 486 501 >> > >Modeline "640x480" 37.36 >>640 656 720 832 480 480 486 501 >> > >Modeline "640x480" 35.53 >>640 656 720 832 480 480 486 501 >> > >Modeline "640x480" 35.28 >>640 656 720 832 480 480 486 501 >> > >Modeline "640x480" 33.61 >>640 656 720 832 480 480 486 501 >> > >Modeline "640x480" 33.45 >>640 656 720 832 480 480 486 501 >> > >Modeline "640x480" 31.78 >>640 656 720 832 480 480 485 501 >> > >Modeline "640x480" 30.45 >>640 656 720 832 480 480 485 501 >> > >Modeline "640x480" 30.28 >>640 656 720 832 480 480 485 501 >> > ># End of generated XFree86 Modelines >> > > >> > ># 640x400 @ 70 Hz, 31.5 kHz hsync >> > >Modeline "640x400" 25.175 640 664 760 800 400 409 411 450 >> > ># 640x480 @ 60 Hz, 31.5 kHz hsync >> > >Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 >> > ># 800x600 @ 56 Hz, 35.15 kHz hsync >> > >ModeLine "800x600" 36 800 824 896 1024 600 601 603 625 >> > ># 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync >> > >Modeline "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817 >> > >Interlace >> > > >> > ># 640x400 @ 85 Hz, 37.86 kHz hsync >> > >Modeline "640x400" 31.5 640 672 736 832 400 401 404 445 >> > >-HSync >> > >+VSync >> > ># 640x480 @ 72 Hz, 36.5 kHz hsync >> > >Modeline "640x480" 31.5 640 680 720 864 480 488 491 521 >> > ># 640x480 @ 75 Hz, 37.50 kHz hsync >> > >ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 >> > >-HSync >> > >-VSync >> > ># 800x600 @ 60 Hz, 37.8 kHz hsync >> > >Modeline "800x600" 40 800 840 968 1056 600 601 605 628 >> > >+hsync >> > >+vsync >> > > >> > ># 640x480 @ 85 Hz, 43.27 kHz hsync >> > >Modeline "640x480" 36 640 696 752 832 480 481 484 509 >> > >-HSync >> > >-VSync >> > ># 1152x864 @ 89 Hz interlaced, 44 kHz hsync >> > >ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 >> > >Interlace >> > > >> > ># 800x600 @ 72 Hz, 48.0 kHz hsync >> > >Modeline "800x600" 50 800 856 976 1040 600 637 643 666 >> > >+hsync >> > >+vsync >> > ># 1024x768 @ 60 Hz, 48.4 kHz hsync >> > >Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 >> > >-hsync >> > >-vsync >> > > >> > ># 640x480 @ 100 Hz, 53.01 kHz hsync >> > >Modeline "640x480" 45.8 640 672 768 864 480 488 494 530 >> > >-HSync >> > >-VSync >> > ># 1152x864 @ 60 Hz, 53.5 kHz hsync >> > >Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892 >> > >-HSync >> > >-VSync >> > ># 800x600 @ 85 Hz, 55.84 kHz hsync >> > >Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 >> > >-HSync >> > >-VSync >> > > >> > ># 1024x768 @ 70 Hz, 56.5 kHz hsync >> > >Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 >> > >-hsync >> > >-vsync >> > ># 1280x1024 @ 87 Hz interlaced, 51 kHz hsync >> > >Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 >> > >Interlace >> > > >> > ># 800x600 @ 100 Hz, 64.02 kHz hsync >> > >Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 >> > >-HSync >> > >-VSync >> > ># 1024x768 @ 76 Hz, 62.5 kHz hsync >> > >Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823 >> > ># 1152x864 @ 70 Hz, 62.4 kHz hsync >> > >Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895 >> > ># 1280x1024 @ 61 Hz, 64.2 kHz hsync >> > >Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054 >> > > >> > ># 1024x768 @ 85 Hz, 70.24 kHz hsync >> > >Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 >>-HSync >> > >-VSync >> > ># 1152x864 @ 78 Hz, 70.8 kHz hsync >> > >Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908 >> > > >> > ># 1280x1024 @ 70 Hz, 74.59 kHz hsync >> > >Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 >> >-HSync >> > >-VSync >> > ># 1600x1200 @ 60Hz, 75.00 kHz hsync >> > >Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 >> >+HSync >> > >+VSync >> > ># 1152x864 @ 84 Hz, 76.0 kHz hsync >> > >Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908 >> > > >> > ># 1280x1024 @ 74 Hz, 78.85 kHz hsync >> > >Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064 >> > > >> > ># 1024x768 @ 100Hz, 80.21 kHz hsync >> > >Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 >> >-HSync >> > >-VSync >> > ># 1280x1024 @ 76 Hz, 81.13 kHz hsync >> > >Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064 >> > > >> > ># 1600x1200 @ 70 Hz, 87.50 kHz hsync >> > >Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 >> > >-HSync >> > >-VSync >> > ># 1152x864 @ 100 Hz, 89.62 kHz hsync >> > >Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 >> > >-HSync >> > >-VSync >> > ># 1280x1024 @ 85 Hz, 91.15 kHz hsync >> > >Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 >> > >+HSync >> > >+VSync >> > ># 1600x1200 @ 75 Hz, 93.75 kHz hsync >> > >Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 >> > >+HSync >> > >+VSync >> > ># 1600x1200 @ 85 Hz, 105.77 kHz hsync >> > >Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 >> > >+HSync >> > >+VSync >> > ># 1280x1024 @ 100 Hz, 107.16 kHz hsync >> > >Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 >> > >-HSync >> > >-VSync >> > > >> > ># 1800x1440 @ 64Hz, 96.15 kHz hsync >> > >ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 >> >+HSync >> > >+VSync >> > ># 1800x1440 @ 70Hz, 104.52 kHz hsync >> > >ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 >> >+HSync >> > >+VSync >> > > >> > ># 512x384 @ 78 Hz, 31.50 kHz hsync >> > >Modeline "512x384" 20.160 512 528 592 640 384 385 388 404 >> >-HSync >> > >-VSync >> > ># 512x384 @ 85 Hz, 34.38 kHz hsync >> > >Modeline "512x384" 22 512 528 592 640 384 385 388 404 >> >-HSync >> > >-VSync >> > > >> > ># Low-res Doublescan modes >> > ># If your chipset does not support doublescan, you get a 'squashed' >> > ># resolution like 320x400. >> > > >> > ># 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio >> > >Modeline "320x200" 12.588 320 336 384 400 200 204 205 225 >> > >Doublescan >> > ># 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio >> > >Modeline "320x240" 12.588 320 336 384 400 240 245 246 262 >> > >Doublescan >> > ># 320x240 @ 72 Hz, 36.5 kHz hsync >> > >Modeline "320x240" 15.750 320 336 384 400 240 244 246 262 >> > >Doublescan >> > ># 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio >> > >ModeLine "400x300" 18 400 416 448 512 300 301 302 312 >> > >Doublescan >> > ># 400x300 @ 60 Hz, 37.8 kHz hsync >> > >Modeline "400x300" 20 400 416 480 528 300 301 303 314 >> > >Doublescan >> > ># 400x300 @ 72 Hz, 48.0 kHz hsync >> > >Modeline "400x300" 25 400 424 488 520 300 319 322 333 >> > >Doublescan >> > ># 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio >> > >ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 >> > >Doublescan >> > ># 480x300 @ 60 Hz, 37.8 kHz hsync >> > >Modeline "480x300" 23.890 480 496 576 632 300 301 303 314 >> > >Doublescan >> > ># 480x300 @ 63 Hz, 39.6 kHz hsync >> > >Modeline "480x300" 25 480 496 576 632 300 301 303 314 >> > >Doublescan >> > ># 480x300 @ 72 Hz, 48.0 kHz hsync >> > >Modeline "480x300" 29.952 480 504 584 624 300 319 322 333 >> > >Doublescan >> > > >> > >Mode "640x480" >> > > # D: 29.999 MHz, H: 34.722 kHz, V: 66.136 Hz >> > > DotClock 30.000 >> > > HTimings 640 720 784 864 >> > > VTimings 480 483 486 525 >> > > Flags "-HSync" "-VSync" >> > >EndMode >> > > >> > >Mode "832x624" >> > > # D: 57.597 MHz, H: 49.997 kHz, V: 74.959 Hz >> > > DotClock 57.598 >> > > HTimings 832 880 944 1152 >> > > VTimings 624 625 628 667 >> > > Flags "-HSync" "-VSync" >> > >EndMode >> > > >> > >EndSection >> > > >> > >Section "Device" >> > > Identifier "My Video Card" >> > > VendorName "Unknown" >> > > BoardName "Unknown" >> > > VideoRam 1024 >> > >EndSection >> > > >> > >Section "Screen" >> > > Driver "accel" >> > > Device "My Video Card" >> > > Monitor "My Monitor" >> > > DefaultColorDepth 8 >> > > >> > > Subsection "Display" >> > > Depth 8 >> > >### Modes "1024x768" "640x480" "800x600" >> > > Modes "800x600" >> > > EndSubsection >> > > >> > > Subsection "Display" >> > > Depth 16 >> > >### Modes "1024x768" "640x480" "800x600" >> > > Modes "800x600" >> > > EndSubsection >> > > >> > > Subsection "Display" >> > > Depth 24 >> > >### Modes "1024x768" "640x480" "800x600" >> > > Modes "800x600" >> > > EndSubsection >> > > >> > > Subsection "Display" >> > > Depth 32 >> > >### Modes "1024x768" "640x480" "800x600" >> > > Modes "800x600" >> > > EndSubsection >> > > >> > >EndSection >> > > >> > >Section "Screen" >> > > Driver "SVGA" >> > > Device "My Video Card" >> > > Monitor "My Monitor" >> > > DefaultColorDepth 8 >> > > >> > > Subsection "Display" >> > > Depth 8 >> > >### Modes "1024x768" "640x480" "800x600" >> > > Modes "800x600" >> > > EndSubsection >> > > >> > > Subsection "Display" >> > > Depth 16 >> > >### Modes "1024x768" "640x480" "800x600" >> > > Modes "800x600" >> > > EndSubsection >> > > >> > > Subsection "Display" >> > > Depth 24 >> > >### Modes "1024x768" "640x480" "800x600" >> > > Modes "800x600" >> > > EndSubsection >> > > >> > > Subsection "Display" >> > > Depth 32 >> > >### Modes "1024x768" "640x480" "800x600" >> > > Modes "800x600" >> > > EndSubsection >> > > >> > >EndSection >> > > >> > >Section "Screen" >> > > Driver "VGA16" >> > > Device "My Video Card" >> > > Monitor "My Monitor" >> > > BlankTime 0 >> > > SuspendTime 0 >> > > OffTime 0 >> > > SubSection "Display" >> > > Depth 4 >> > > Modes "800x600" >> > > EndSubSection >> > >EndSection >> > > >> > >Section "Screen" >> > > Driver "VGA2" >> > > Device "My Video Card" >> > > Monitor "My Monitor" >> > > BlankTime 0 >> > > SuspendTime 0 >> > > OffTime 0 >> > > SubSection "Display" >> > > Depth 1 >> > > Modes "800x600" >> > > EndSubSection >> > >EndSection >> > > >> > > >> > >_________________________________________________________________ >> > >Get your FREE download of MSN Explorer at >> >http://explorer.msn.com/intl.asp >> > > >> > >_______________________________________________ >> > >Newbie mailing list >> > >[EMAIL PROTECTED] >> > >*** To unsubscribe , or change message options, see: >> > >http://XFree86.Org/mailman/listinfo/newbie >> > >> > >> >_________________________________________________________________ >> >Get your FREE download of MSN Explorer at >>http://explorer.msn.com/intl.asp >> > >> >_______________________________________________ >> >Newbie mailing list >> >[EMAIL PROTECTED] >> >*** To unsubscribe , or change message options, see: >> >http://XFree86.Org/mailman/listinfo/newbie >> > >> >_______________________________________________ >> >Newbie mailing list >> >[EMAIL PROTECTED] >> >*** To unsubscribe , or change message options, see: >> >http://XFree86.Org/mailman/listinfo/newbie >> >> >>_________________________________________________________________ >>Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp >> >>_______________________________________________ >>Newbie mailing list >>[EMAIL PROTECTED] >>*** To unsubscribe , or change message options, see: >>http://XFree86.Org/mailman/listinfo/newbie >> >>_______________________________________________ >>Newbie mailing list >>[EMAIL PROTECTED] >>*** To unsubscribe , or change message options, see: >>http://XFree86.Org/mailman/listinfo/newbie > > >_______________________________________________ >Newbie mailing list >[EMAIL PROTECTED] >*** To unsubscribe , or change message options, see: >http://XFree86.Org/mailman/listinfo/newbie _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp _______________________________________________ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie _______________________________________________ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie _______________________________________________ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
