It seems you are using the frame buffer I would regenerate a XF86Config file either with Xconfigurator or with XFree86 -config (not quite sure there you may have to man XFree86). backup your XF86Config[-4] before and try... Lionel --- Don Pyke <[EMAIL PROTECTED]> wrote: > I am a novice but I have had the x runninng on one > system but I am not getting it working here. > I am using Slackware 8 and have a S3 Virge/dx 4096 > mem and generic 8 bit display > -------------------------------------------start > XFree86 Version 4.1.0 / X Window System > > (protocol Version 11, revision 0, vendor release > 6510) > > Release Date: 2 June 2001 > > If the server is older than 6-12 months, or if your > card is > > newer than the above date, look for a newer version > before > > reporting problems. (See http://www.XFree86.Org/FAQ) > > Build Operating System: Linux 2.2.19 i686 [ELF] > > Module Loader present > > (==) Log file: "/var/log/XFree86.0.log", Time: Sun > Oct 14 22:08:06 2001 > > (==) Using config file: "/etc/X11/XF86Config" > > Markers: (--) probed, (**) from config file, (==) > default setting, > > (++) from command line, (!!) notice, (II) > informational, > > (WW) warning, (EE) error, (NI) not implemented, (??) > unknown. > > (==) ServerLayout "Simple Layout" > > (**) |-->Screen "Screen 1" (0) > > (**) | |-->Monitor "My Monitor" > > (**) | |-->Device "VESA Framebuffer" > > (**) |-->Input Device "Mouse1" > > (**) |-->Input Device "Keyboard1" > > (**) Option "AutoRepeat" "500 30" > > (**) Option "XkbRules" "xfree86" > > (**) XKB: rules: "xfree86" > > (**) Option "XkbModel" "pc101" > > (**) XKB: model: "pc101" > > (**) Option "XkbLayout" "us" > > (**) XKB: layout: "us" > > (==) Keyboard: CustomKeycode disabled > > (**) FontPath set to > "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" > > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > > (==) ModulePath set to "/usr/X11R6/lib/modules" > > (--) using VT number 7 > > (WW) Cannot open APM > > (II) Module ABI versions: > > XFree86 ANSI C Emulation: 0.1 > > XFree86 Video Driver: 0.4 > > XFree86 XInput driver : 0.2 > > XFree86 Server Extension : 0.1 > > XFree86 Font Renderer : 0.2 > > (II) Loader running on linux > > (II) LoadModule: "bitmap" > > (II) Loading > /usr/X11R6/lib/modules/fonts/libbitmap.a > > (II) Module bitmap: vendor="The XFree86 Project" > > compiled for 4.1.0, module version = 1.0.0 > > Module class: XFree86 Font Renderer > > ABI class: XFree86 Font Renderer, version 0.2 > > (II) Loading font Bitmap > > (II) LoadModule: "pcidata" > > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > > (II) Module pcidata: vendor="The XFree86 Project" > > compiled for 4.1.0, module version = 0.1.0 > > ABI class: XFree86 Video Driver, version 0.4 > > (II) PCI: Probing config type using method 1 > > (II) PCI: Config type is 1 > > (II) PCI: stages = 0x03, oldVal1 = 0x00000000, > mode1Res1 = 0x80000000 > > (II) PCI: PCI scan (all values are in hex) > > (II) PCI: 00:00:0: chip 8086,7030 card 0000,0000 rev > 02 class 06,00,00 hdr 00 > > (II) PCI: 00:07:0: chip 8086,7000 card 0000,0000 rev > 01 class 06,01,00 hdr 80 > > (II) PCI: 00:07:1: chip 8086,7010 card 0000,0000 rev > 00 class 01,01,80 hdr 00 > > (II) PCI: 00:08:0: chip 5333,8a01 card 5333,8a01 rev > 01 class 03,00,00 hdr 00 > > (II) PCI: 00:09:0: chip 10ec,8029 card 10ec,8029 rev > 00 class 02,00,00 hdr 00 > > (II) PCI: End of PCI scan > > (II) LoadModule: "scanpci" > > (II) Loading /usr/X11R6/lib/modules/libscanpci.a > > (II) Module scanpci: vendor="The XFree86 Project" > > compiled for 4.1.0, module version = 0.1.0 > > ABI class: XFree86 Video Driver, version 0.4 > > (II) UnloadModule: "scanpci" > > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a > > (II) Host-to-PCI bridge: > > (II) PCI-to-ISA bridge: > > (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: > 0x08 (VGA_EN is set) > > (II) Bus 0 I/O range: > > [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] > > (II) Bus 0 non-prefetchable memory range: > > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > > (II) Bus 0 prefetchable memory range: > > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > > (II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: > 0x08 (VGA_EN is set) > > (II) Bus -1 I/O range: > > (II) Bus -1 non-prefetchable memory range: > > (II) Bus -1 prefetchable memory range: > > (--) PCI:*(0:8:0) S3 ViRGE/DX or /GX rev 1, Mem @ > 0xe0000000/26 > > (II) Addressable bus resource ranges are > > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > > [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] > > (II) OS-reported resource ranges: > > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) > MX[B]E(B) > > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > === message truncated ===
__________________________________________________ Do You Yahoo!? Make a great connection at Yahoo! Personals. http://personals.yahoo.com _______________________________________________ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
