Hi all!
I have subscribed to this ML yesterday and I already found a lot of
useful information about how to configure XFree for using it with Kyro
II (Guillemot Prophet 3D 4500 - 64Mb) looking in the ML archives.
I was able to make X start in 1024x768 (using the vesa drivers of
course), but, while KDE is initializing the peripherals, XFree crashes:-((
I am using RedHat 7.2 (XFree 4.1). My mouse is a Logitech I-touch
Mouseman (it is an USB mouse) and the keyboard is a Logitech Deluxe Access.
The error.out file containing the XFree complaints and the
XFree68config-4 are attached below.
Thanks in advance
Bye
Alberto
--
Home page: http://www.tiscali.it/albertoferrante
XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.7-0.13.1smp i686 [ELF]
Build Host: stripples.devel.redhat.com
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Dec 4 00:05:19 2001
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "IBM E74"
(**) | |-->Device "Kyro"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) XKB: layout: "it"
(**) FontPath set to "unix/:7100"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:0:0) SGS-Thomson unknown chipset (0x0010) rev 15, Mem @ 0xd0000000/27,
0xdfc80000/19, I/O @ 0xac00/8, BIOS @ 0xdfee0000/17
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.0.1
(II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.o
(II) Module vesa: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) v4l driver for Video4Linux
(II) VESA: driver for VESA chipsets: vesa
(--) Assigning device section with no busID to primary device
(--) Chipset vesa found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(**) VESA(0): Depth 16, (--) framebuffer bpp 16
(==) VESA(0): RGB weight 565
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) VESA(0): VESA VBE DDC supported
(II) VESA(0): Manufacturer: IBM Model: 18bc Serial#: 16843009
(II) VESA(0): Year: 2000 Week: 47
(II) VESA(0): EDID Version: 1.2
(II) VESA(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) VESA(0): Sync: Separate
(II) VESA(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24
(II) VESA(0): Gamma: 2.88
(II) VESA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) VESA(0): First detailed timing is preferred mode
(II) VESA(0): redX: 0.631 redY: 0.329 greenX: 0.276 greenY: 0.600
(II) VESA(0): blueX: 0.143 blueY: 0.057 whiteX: 0.283 whiteY: 0.298
(II) VESA(0): Supported VESA Video Modes:
(II) VESA(0): 720x400@70Hz
(II) VESA(0): 640x480@60Hz
(II) VESA(0): 640x480@67Hz
(II) VESA(0): 640x480@75Hz
(II) VESA(0): 800x600@60Hz
(II) VESA(0): 800x600@75Hz
(II) VESA(0): 1024x768@60Hz
(II) VESA(0): 1024x768@70Hz
(II) VESA(0): 1024x768@75Hz
(II) VESA(0): Manufacturer's mask: 0
(II) VESA(0): Supported Future Video Modes:
(II) VESA(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) VESA(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) VESA(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) VESA(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) VESA(0): #4: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) VESA(0): Supported additional Video Mode:
(II) VESA(0): clock: 94.5 MHz Image Size: 306 x 230 mm
(II) VESA(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) VESA(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) VESA(0): Monitor name: IBM E74
(II) VESA(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 69 kHz, PixClock max
110 MHz
(II) VESA(0): Serial No: 66-ARL20
(==) VESA(0): DPI set to (75, 75)
(--) VESA(0): Virtual size is 1024x768 (pitch 1024)
(**) VESA(0): Default mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0
Hz
(**) VESA(0): Default mode "800x600"
(**) VESA(0): Default mode "640x480"
(**) VESA(0): Using "Shadow Framebuffer"
(II) Loading /usr/X11R6/lib/modules/libshadow.a
(II) Module shadow: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Backing store disabled
(**) VESA(0): DPMS enabled
(**) Mouse0: Protocol: "IMPS/2"
(**) Mouse0: Core Pointer
(==) Mouse0: Buttons: 3
(**) Mouse0: ChordMiddle
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
X Error of failed request: 86
Major opcode of failed request: 51 (X_SetFontPath)
Serial number of failed request: 9
Current serial number in output stream: 11
DCOPServer up and running.
Fatal server error:
Caught signal 4. Server aborting
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [EMAIL PROTECTED]
artsmessage: Fatal IO error: client killed
xinit: connection to X server lost.
kdeinit: Fatal IO error: client killed
kdeinit: sending SIGHUP to children.
KLauncher: Exiting on signal 1
kdeinit: sending SIGTERM to children.
kdeinit: Exit.
# XFree86 4.0 configuration generated by Xconfigurator
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
# By default, Red Hat Linux 6.0 and later use xfs
Section "Files"
FontPath "unix/:7100"
EndSection
# Module loading section
Section "Module"
Load "dbe" # Double-buffering
Load "GLcore" # OpenGL support
Load "dri" # Direct rendering infrastructure
Load "glx" # OpenGL X protocol interface
Load "extmod" # Misc. required extensions
Load "v4l" # Video4Linux
# Load "pex5" # PHIGS for X 3D environment (obsolete)
# Load "record" # X event recorder
# Load "xie" # X Image Extension (obsolete)
# You only need the following two modules if you do not use xfs.
# Load "freetype" # TrueType font handler
# Load "type1" # Adobe Type 1 font handler
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbLayout" "it"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Device" "/dev/mouse"
Option "Protocol" "IMPS/2"
Option "Emulate3Buttons" "off"
Option "ZAxisMapping" "4 5"
Option "ChordMiddle" "on"
EndSection
Section "Monitor"
Identifier "IBM E74"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30 - 69
VertRefresh 50 - 120
Option "dpms"
EndSection
Section "Device"
Identifier "Kyro"
Driver "vesa"
BoardName "Unknown"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Kyro"
Monitor "IBM E74"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
