Run 'XFree86 -configure'
and then change the /root/XF86Config.new file to have
BusID "PCI:1:5:0"
Alan.
On Thu, Jan 31, 2002 at 04:09:16PM +0100, Sebastian Loebbert wrote:
> Hey,
>
> I have some problems getting my Elsa Gloria XXL (AGP) to work with XFree
> 4.1.0 on a Suse 7.3 Linux with 2.4.10 SMP kernel on a Tyan Tiger
> 2460 mobo.
> According to the manual, the card uses a GLINT MX as "graphics
> processor" (with "16 MB VRAM), a Permedia 2 as "graphics chip"
> (with "2MB video memory") and a GLINT GAMMA as
> "graphics coprocessor". There are
> "24MB EDO-RAM for Z-buffer and textures" on the board.
>
> My first question is: Which of these three chips is the one I have to use
> for my XF86Config?
> With both the Permedia and the MX I can run 1280x1024 in 8 bit depth.
> Using higher color depths does not work (neither of 15,16,24 bpp).
> How can I configure this card for supporting 1280x1024 @
> 24bpp?
> How do I configure the other 2 chips and what about all the different
> kinds of memory on the card, do I have to configure them, too?
> Is there a sample XF86Config for this card somewhere?
>
> TIA,
>
> Sebastian Lbbert
>
>
>
> following:
> scanpci output
>
>
>
> ############
>
> scanpci shows me 3 graphics chips:
> pci bus 0x1 cardnum 0x05 function 0x0000: vendor 0x3d3d device 0x0008
> 3Dlabs GLINT Gamma
>
> pci bus 0x1 cardnum 0x05 function 0x0001: vendor 0x3d3d device 0x0009
> 3Dlabs GLINT Permedia 2v
>
> pci bus 0x1 cardnum 0x05 function 0x0002: vendor 0x3d3d device 0x0006
> 3Dlabs GLINT MX
>
> #################
>
> _______________________________________________
> Newbie mailing list
> [EMAIL PROTECTED]
> *** To unsubscribe , or change message options, see:
> http://XFree86.Org/mailman/listinfo/newbie
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
