I tried as you suggested. This fixed the Speedo and Type1 error... but still have the same results as before with the black screen.
The sync rates from the viewsonic website said 1600 x 1200 @ 77Hz 1280 x 1024 @ 90Hz 1024 x 768 @ 118Hz 800 x 600 @ 149Hz 640 x 480 @ 180Hz I want to run this at 1600x1200 @ 77Hz but I would be happy with anything at this point. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Ted Spradley Sent: Friday, February 08, 2002 1:24 PM To: [EMAIL PROTECTED] Subject: Re: [Newbie]Xfree86 4.1.12, FreeBSD4.5, ATI Radeon 7000 VE Duel Bryan wrote: > > I have tried using startx and just testing the config with > XFree86 -xf86config > I get a black screen and the monitor clicks of from lack of imput. > I tried to get back to text console... the monitor came back to life but the > screen just had a few line patterns on it. I was unable to get anything > useful without rebooting or sshing from another computer on the network. That sure sounds like the Horizontal or Vertical synch is outside of the range the monitor can handle. The Viewsonic G810 is getting a bit old, but it was a *very* nice monitor, and should be able to do: (**) RADEON(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz That Horizsync 30-97 VertRefresh 50-180 does come from DDC and it's not something you made up, is it? That 180 Hz seems a bit optimistic, but 85 Hz doesn't seem out of line. IIRC, I used to run a G810 at 1280X1024 at 72 or maybe 76 Hz (under Digital Unix). Just for an experiment, try changing that 50-180 to, say, 50-80 and see what happens. > I still don't understand why the Speedo and Type1 modules aren't loading > because I have the path in the config and the files are there. Add Load "type1" Load "freetype" Load "speedo" to the "Module" section of XF86Config -- Remember, more computing power was thrown away last week than existed in the world in 1982. -- http://www.tom.womack.net/computing/prices.html _______________________________________________ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie _______________________________________________ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
