Hi,
I'm having trouble setting up an ATI Radeon VE QY display adapter with two Dell
1702FP flat panel monitors using DVI.
The X log files suggest all is OK - see below - but the sad fact is that only
display 0 is accessible. The mouse seems to think that display 1 is available,
vanishing off into the dark, but all I visually get on the second monitor is a
message when I press the Auto Adjust button that "In Power Save Mode Press any
key on the Keyboard or Move Mouse".
Any help would be appreciated!
Bruce
Relevant sections of the XF86Config:
Section "ServerLayout"
Identifier "Multihead"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
#Screen 1 "Screen1" 1 1
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "BlankTime" "5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Dell"
ModelName "Dell 1702FP"
HorizSync 31.5-82
VertRefresh 50-90
# -- 1400x1050 --
# 1400x1050 @ 60Hz, 65.8 kHz hsync
Modeline "1400x1050" 129 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 70Hz, 76.8 kHz hsync
Modeline "1400x1050" 151 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 75Hz, 82.3 kHz hsync
Modeline "1400x1050" 162 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 85Hz, 93.2 kHz hsync
Modeline "1400x1050" 184 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Dell"
ModelName "Dell 1702FP"
HorizSync 31.5-82
VertRefresh 50-90
# -- 1400x1050 --
# 1400x1050 @ 60Hz, 65.8 kHz hsync
Modeline "1400x1050" 129 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 70Hz, 76.8 kHz hsync
Modeline "1400x1050" 151 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 75Hz, 82.3 kHz hsync
Modeline "1400x1050" 162 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 85Hz, 93.2 kHz hsync
Modeline "1400x1050" 184 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
EndSection
Section "Device"
Identifier "RadeonVE0"
Driver "radeon"
VendorName "ATI"
BoardName "Radeon VE QY"
BusID "PCI:1:0:0"
Option "NoAccel"
Option "AGPMode" "4"
VideoRam 32768
Screen 0
EndSection
Section "Device"
Identifier "RadeonVE1"
Driver "radeon"
VendorName "ATI"
BoardName "Radeon VE QY"
BusID "PCI:1:0:0"
Option "NoAccel"
Option "AGPMode" "4"
VideoRam 32768
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "RadeonVE0"
Monitor "Monitor0"
DefaultDepth 16
Option "nodri"
Subsection "Display"
Depth 16
Modes "1280x1024"
EndSubsection
EndSection
Section "Screen"
Identifier "Screen1"
Device "RadeonVE1"
Monitor "Monitor1"
DefaultDepth 16
Option "nodri"
Subsection "Display"
Depth 16
Modes "1280x1024"
EndSubsection
EndSection
XFree86.0.log:
(==) RADEON(0): Write-combining range (0xf0000000,0x1000000)
(WW) RADEON(0): Acceleration disabled, not initializing the DRI
(II) RADEON(0): Memory manager initialized to (0,0) (1312,6393)
(II) RADEON(0): Reserved area from (0,1024) to (1312,1026)
(II) RADEON(0): Largest offscreen area available: 1312 x 5367
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Acceleration disabled
(II) RADEON(0): Using hardware cursor (scanline 2052)
(II) RADEON(0): Largest offscreen area available: 1312 x 5365
(WW) RADEON(0): Option "nodri" is not used
(II) RADEON(0): Direct rendering disabled
(II) RADEON(1): Splitting WC range: base: 0xf1000000, size: 0x2000000
(==) RADEON(1): Write-combining range (0xf2000000,0x1000000)
(==) RADEON(1): Write-combining range (0xf1000000,0x2000000)
(WW) RADEON(1): Acceleration disabled, not initializing the DRI
(II) RADEON(1): Memory manager initialized to (0,0) (1312,8191)
(II) RADEON(1): Reserved area from (0,1024) to (1312,1026)
(II) RADEON(1): Largest offscreen area available: 1312 x 7165
(==) RADEON(1): Backing store disabled
(==) RADEON(1): Silken mouse enabled
(II) RADEON(1): Acceleration disabled
(II) RADEON(1): Using hardware cursor (scanline 2052)
(II) RADEON(1): Largest offscreen area available: 1312 x 7163
(WW) RADEON(1): Option "nodri" is not used
(II) RADEON(1): Direct rendering disabled
(II) Setting vga for screen 0.
(II) Setting vga for screen 1.
(II) Entity 0 shares no resources
(II) Entity 1 shares no resources
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "PS/2"
(**) Mouse0: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 5
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
SetKbdSettings - type: 2 rate: 30 delay: 500 snumlk: 0
SetKbdSettings - Succeeded
--
Bruce Morgan
Network Engineer
AARNet Pty Ltd Mobile: 04 0888 2390
http://www.aarnet.edu.au mailto:[EMAIL PROTECTED]
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
