used setrage, AGP card -----Original Message----- From: Dexter Filmore [mailto:[EMAIL PROTECTED]] Sent: Wednesday, February 20, 2002 4:11 AM To: [EMAIL PROTECTED] Subject: Re: FW: [Newbie]ATI Rage 128 on Debian no BIOS detected
Looks like X can't find the mem range where the card BIOS should be. Was your XF86Config generated with X -configure or some other program? Is it an AGP or PCI card? > > X -version > > (EE) R128(0): Cannot read V_BIOS (5) > (--) R128(0): Chipset: "ATI Rage 128 RE (PCI)" (ChipID = 0x5245) > (--) R128(0): Linear framebuffer at 0x88000000 > (--) R128(0): MMIO registers at 0x80900000 > (--) R128(0): BIOS at 0x80920000 > (II) R128(0): Video RAM override, using 32768 kB instead of 16384 kB > (**) R128(0): VideoRAM: 32768 kByte (128-bit SDR SGRAM 1:1) > (WW) R128(0): Video BIOS not detected in PCI space! > (WW) R128(0): Attempting to read Video BIOS from legacy ISA space! > (WW) R128(0): Video BIOS not found! > (WW) R128(0): Can't determine panel dimensions, and none specified. > > Disabling programming of FP registers. > (II) R128(0): PLL parameters: rf=2950 rd=35 min=12500 max=25000; xclk=7501 > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Loading /usr/X11R6/lib/modules/libddc.a > (II) Module ddc: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.5 > (==) R128(0): Using gamma correction (1.0, 1.0, 1.0) > (II) R128(0): My Monitor: Using hsync range of 31.50-37.90 kHz > (II) R128(0): My Monitor: Using vrefresh range of 50.00-70.00 Hz > (II) R128(0): Clock range: 12.50 to 250.00 MHz > (II) R128(0): Not using default mode "640x350" (vrefresh out of range) > (II) R128(0): Not using default mode "320x175" (vrefresh out of range) > (II) R128(0): Not using default mode "640x400" (vrefresh out of range) > (II) R128(0): Not using default mode "320x200" (vrefresh out of range) > (II) R128(0): Not using default mode "720x400" (vrefresh out of range) > (II) R128(0): Not using default mode "360x200" (vrefresh out of range) > (II) R128(0): Not using default mode "640x480" (vrefresh out of range) > (II) R128(0): Not using default mode "320x240" (vre _______________________________________________ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie _______________________________________________ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
