Hello Whaled,
This was bounced.!
Mail Administrator wrote:
>
> This Message was undeliverable due to the following reason:
>
> Each of the following recipients was rejected by a remote mail server.
> The reasons given by the server are included to help you determine why
> each recipient was rejected.
>
> Recipient: <[EMAIL PROTECTED]>
> Reason: Requested action not taken:user account inactive
>
> Please reply to <[EMAIL PROTECTED]>
> if you feel this message to be in error.
>
> ------------------------------------------------------------------------
> Reporting-MTA: dns; mta06bw.bigpond.com
> Received-From-MTA:dns; bigpond.com (144.135.24.78)
> Arrival-Date: Fri, 15 Feb 2002 15:49:15 +1000
>
> Remote-Recipient: rfc822;<[EMAIL PROTECTED]>
> Diagnostic-Code: smtp;551 SMTP-Deliver:BadRecipient
> Action: failed
> Status: 5.1.6
> Remote-MTA: DNS;mx09.hotmail.com
> Last-Attempt-Date: Fri, 15 Feb 2002 15:49:17 +1000
>
> ------------------------------------------------------------------------
>
> Subject: [Fwd: [Newbie]Laptops with the dreaded SiS630 chip]
> Date: Tue, 12 Feb 2002 17:38:20 +1100
> From: Graeme Nichols <[EMAIL PROTECTED]>
> To: waleed mh <[EMAIL PROTECTED]>
>
> Hello Wahleed,
>
> This is how I managed it. I hope it helps.
>
> Graeme Nichols wrote:
> >
> > Hello Folks,
> >
> > I'm over the moon!
> >
> > I have been trying for a long time to get X running on my laptop. It is
> > badged 'Pioneer' but is manufactured by Clevo. It is known by a lot of
> > names around the world. It is based on the SiS630 chip. It is a 1G PIII
> > with 256M of ram and with a SmartLink winmodem based on the SiS630 chip.
> >
> > Well, I now have X up and running and the modem is runing as well. I'm
> > sending this message using it.
> >
> > How I did it?
> >
> > I did a vanilla install of RedHat 7.1. It has kernel 2.4.2-2 and Xfree
> > 4.0.3. I accepted the results of the probe for the chip, which was found
> > correctly, chose a generic laptop display of 1024x768 and chose not to
> > test X during the install. After a successful install I rebooted, edited
> > lilo.conf with pico and added the line:- vga=791 and reboted again. I
> > logged in under my user login and did a startx. The first thing was that
> > the screen now had a much tidier look with some 50 plus lines and many
> > more chars wide. Also Tux was up in the top left while Linux was
> > loading. Luverly!!
> >
> > The icing on the cake was the discovery on the net of a driver for the
> > inbuilt modem. File name:- sl_2.03-01.zip. This driver is specific to
> > Redhat 7.1 and kernel 2.4.2-2. The zip file contains a readme file with
> > full instructions on how to compile and install and load the driver. It
> > all went very smoothly.
> >
> > I now have a fully functioning SiS630 based laptop complete with a
> > working modem. Bloody marvellous!!
> >
> > If anyone wants the modem driver I can send it to you if you cannot find
> > it on the net.
> >
> > I hope this may help others with the generic Clevo laptops.
> >
> > Graeme.
> >
> > _______________________________________________
> > Newbie mailing list
> > [EMAIL PROTECTED]
> > *** To unsubscribe , or change message options, see:
> > http://XFree86.Org/mailman/listinfo/newbie
>
> ------------------------------------------------------------------------
>
> Subject: [Newbie]Laptops with the dreaded SiS630 chip
> Date: Wed, 06 Feb 2002 17:36:33 +1100
> From: Graeme Nichols <[EMAIL PROTECTED]>
> Reply-To: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED]
>
> Hello Folks,
>
> I'm over the moon!
>
> I have been trying for a long time to get X running on my laptop. It is
> badged 'Pioneer' but is manufactured by Clevo. It is known by a lot of
> names around the world. It is based on the SiS630 chip. It is a 1G PIII
> with 256M of ram and with a SmartLink winmodem based on the SiS630 chip.
>
> Well, I now have X up and running and the modem is runing as well. I'm
> sending this message using it.
>
> How I did it?
>
> I did a vanilla install of RedHat 7.1. It has kernel 2.4.2-2 and Xfree
> 4.0.3. I accepted the results of the probe for the chip, which was found
> correctly, chose a generic laptop display of 1024x768 and chose not to
> test X during the install. After a successful install I rebooted, edited
> lilo.conf with pico and added the line:- vga=791 and reboted again. I
> logged in under my user login and did a startx. The first thing was that
> the screen now had a much tidier look with some 50 plus lines and many
> more chars wide. Also Tux was up in the top left while Linux was
> loading. Luverly!!
>
> The icing on the cake was the discovery on the net of a driver for the
> inbuilt modem. File name:- sl_2.03-01.zip. This driver is specific to
> Redhat 7.1 and kernel 2.4.2-2. The zip file contains a readme file with
> full instructions on how to compile and install and load the driver. It
> all went very smoothly.
>
> I now have a fully functioning SiS630 based laptop complete with a
> working modem. Bloody marvellous!!
>
> If anyone wants the modem driver I can send it to you if you cannot find
> it on the net.
>
> I hope this may help others with the generic Clevo laptops.
>
> Graeme.
>
> _______________________________________________
> Newbie mailing list
> [EMAIL PROTECTED]
> *** To unsubscribe , or change message options, see:
> http://XFree86.Org/mailman/listinfo/newbie
--- Begin Message ---
This Message was undeliverable due to the following reason:
Each of the following recipients was rejected by a remote mail server.
The reasons given by the server are included to help you determine why
each recipient was rejected.
Recipient: <[EMAIL PROTECTED]>
Reason: Requested action not taken:user account inactive
Please reply to <[EMAIL PROTECTED]>
if you feel this message to be in error.
Reporting-MTA: dns; mta06bw.bigpond.com
Received-From-MTA:dns; bigpond.com (144.135.24.78)
Arrival-Date: Fri, 15 Feb 2002 15:49:15 +1000
Remote-Recipient: rfc822;<[EMAIL PROTECTED]>
Diagnostic-Code: smtp;551 SMTP-Deliver:BadRecipient
Action: failed
Status: 5.1.6
Remote-MTA: DNS;mx09.hotmail.com
Last-Attempt-Date: Fri, 15 Feb 2002 15:49:17 +1000
--- Begin Message ---
Hello Wahleed,
This is how I managed it. I hope it helps.
Graeme Nichols wrote:
>
> Hello Folks,
>
> I'm over the moon!
>
> I have been trying for a long time to get X running on my laptop. It is
> badged 'Pioneer' but is manufactured by Clevo. It is known by a lot of
> names around the world. It is based on the SiS630 chip. It is a 1G PIII
> with 256M of ram and with a SmartLink winmodem based on the SiS630 chip.
>
> Well, I now have X up and running and the modem is runing as well. I'm
> sending this message using it.
>
> How I did it?
>
> I did a vanilla install of RedHat 7.1. It has kernel 2.4.2-2 and Xfree
> 4.0.3. I accepted the results of the probe for the chip, which was found
> correctly, chose a generic laptop display of 1024x768 and chose not to
> test X during the install. After a successful install I rebooted, edited
> lilo.conf with pico and added the line:- vga=791 and reboted again. I
> logged in under my user login and did a startx. The first thing was that
> the screen now had a much tidier look with some 50 plus lines and many
> more chars wide. Also Tux was up in the top left while Linux was
> loading. Luverly!!
>
> The icing on the cake was the discovery on the net of a driver for the
> inbuilt modem. File name:- sl_2.03-01.zip. This driver is specific to
> Redhat 7.1 and kernel 2.4.2-2. The zip file contains a readme file with
> full instructions on how to compile and install and load the driver. It
> all went very smoothly.
>
> I now have a fully functioning SiS630 based laptop complete with a
> working modem. Bloody marvellous!!
>
> If anyone wants the modem driver I can send it to you if you cannot find
> it on the net.
>
> I hope this may help others with the generic Clevo laptops.
>
> Graeme.
>
> _______________________________________________
> Newbie mailing list
> [EMAIL PROTECTED]
> *** To unsubscribe , or change message options, see:
> http://XFree86.Org/mailman/listinfo/newbie
--- Begin Message ---
Hello Folks,
I'm over the moon!
I have been trying for a long time to get X running on my laptop. It is
badged 'Pioneer' but is manufactured by Clevo. It is known by a lot of
names around the world. It is based on the SiS630 chip. It is a 1G PIII
with 256M of ram and with a SmartLink winmodem based on the SiS630 chip.
Well, I now have X up and running and the modem is runing as well. I'm
sending this message using it.
How I did it?
I did a vanilla install of RedHat 7.1. It has kernel 2.4.2-2 and Xfree
4.0.3. I accepted the results of the probe for the chip, which was found
correctly, chose a generic laptop display of 1024x768 and chose not to
test X during the install. After a successful install I rebooted, edited
lilo.conf with pico and added the line:- vga=791 and reboted again. I
logged in under my user login and did a startx. The first thing was that
the screen now had a much tidier look with some 50 plus lines and many
more chars wide. Also Tux was up in the top left while Linux was
loading. Luverly!!
The icing on the cake was the discovery on the net of a driver for the
inbuilt modem. File name:- sl_2.03-01.zip. This driver is specific to
Redhat 7.1 and kernel 2.4.2-2. The zip file contains a readme file with
full instructions on how to compile and install and load the driver. It
all went very smoothly.
I now have a fully functioning SiS630 based laptop complete with a
working modem. Bloody marvellous!!
If anyone wants the modem driver I can send it to you if you cannot find
it on the net.
I hope this may help others with the generic Clevo laptops.
Graeme.
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
--- End Message ---
--- End Message ---
--- End Message ---
