Hello,
I hava a problem running Xfree86 Version 4.2.0 with my ATI PCI Mach64 card
(under XFree86 Version 3.3.6 there is no problem).
When I start the X server I get only a blank screen and the crt monitor
goes in 'Power Off' mode.
Using the vga or vesa driver I have no problem.
With the ati i tried different resolutins with different VertRefresh and
even my old ModLine entry
ModeLine "1024x768" 80 1024 1056 1096 1374 768 774 776 800
but it did not help.....
Here is my configuration file and the log output.
Any helpful advice?
Thanks in advance for your help,
Peter
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "extmod"
Load "glx"
Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "speedo"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/mouse"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-68
VertRefresh 50-100
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "accel" # [<bool>]
#Option "crt_screen" # [<bool>]
#Option "composite_sync" # [<bool>]
#Option "hw_cursor" # [<bool>]
#Option "linear" # [<bool>]
#Option "mmio_cache" # [<bool>]
#Option "probe_clocks" # [<bool>]
#Option "reference_clock" # <freq>
#Option "shadow_fb" # [<bool>]
#Option "sw_cursor" # [<bool>]
Identifier "Card0"
Driver "ati"
VendorName "ATI"
BoardName "Mach64 GX"
ChipSet "ati"
ChipId 0x4758
ChipRev 0x1
BusID "PCI:0:12:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
EndSection
XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.7 i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Mar 13 13:38:00 2002
(++) Using config file: "/root/XF86Config.old"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,122d card 0000,0000 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:07:0: chip 8086,122e card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,1230 card 0000,0000 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:09:0: chip 9004,7178 card 0000,0000 rev 00 class 01,00,00 hdr 00
(II) PCI: 00:0a:0: chip 1274,1371 card 1274,1371 rev 06 class 04,01,00 hdr 00
(II) PCI: 00:0b:0: chip 10ec,8029 card 10ec,8029 rev 00 class 02,00,00 hdr 00
(II) PCI: 00:0c:0: chip 1002,4758 card 0000,0000 rev 01 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(0:12:0) ATI Mach64 GX rev 1, Mem @ 0xfb000000/23
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xfbfdf000 - 0xfbfdffff (0x1000) MX[B]
[1] -1 0xfb000000 - 0xfb7fffff (0x800000) MX[B](B)
[2] -1 0x0000d800 - 0x0000d81f (0x20) IX[B]
[3] -1 0x0000e000 - 0x0000e03f (0x40) IX[B]
[4] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[5] -1 0x0000e800 - 0x0000e80f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xfbfdf000 - 0xfbfdffff (0x1000) MX[B]
[1] -1 0xfb000000 - 0xfb7fffff (0x800000) MX[B](B)
[2] -1 0x0000d800 - 0x0000d81f (0x20) IX[B]
[3] -1 0x0000e000 - 0x0000e03f (0x40) IX[B]
[4] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[5] -1 0x0000e800 - 0x0000e80f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xfbfdf000 - 0xfbfdffff (0x1000) MX[B]
[6] -1 0xfb000000 - 0xfb7fffff (0x800000) MX[B](B)
[7] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[9] -1 0x0000d800 - 0x0000d81f (0x20) IX[B]
[10] -1 0x0000e000 - 0x0000e03f (0x40) IX[B]
[11] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[12] -1 0x0000e800 - 0x0000e80f (0x10) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 6.4.8
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) ATI: ATI driver (version 6.4.8) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 SM (AGP),
ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP),
ATI Rage 128 Pro PP (PCI), ATI Rage 128 Pro PR (PCI),
ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP),
ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP),
ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LY (AGP),
ATI Radeon Mobility LZ (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 8500 QN (AGP), ATI Radeon 8500 QO (AGP),
ATI Radeon 8500 Ql (AGP), ATI Radeon 8500 BB (AGP),
ATI Radeon 7500 QW (AGP)
(II) Primary Device is: PCI 00:0c:0
(II) ATI: Candidate "Device" section "Card0".
(II) ATI: Shared PCI Mach64 in slot 0:12:0 with sparse PIO base 0x02EC detected.
(II) ATI: VGA Wonder at I/O port 0x01CE detected.
(II) ATI: Shared PCI Mach64 in slot 0:12:0 assigned to active "Device" section
"Card0".
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xfbfdf000 - 0xfbfdffff (0x1000) MX[B]
[6] -1 0xfb000000 - 0xfb7fffff (0x800000) MX[B](B)
[7] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[9] -1 0x0000d800 - 0x0000d81f (0x20) IX[B]
[10] -1 0x0000e000 - 0x0000e03f (0x40) IX[B]
[11] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[12] -1 0x0000e800 - 0x0000e80f (0x10) IX[B]
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xfbfdf000 - 0xfbfdffff (0x1000) MX[B]
[6] -1 0xfb000000 - 0xfb7fffff (0x800000) MX[B](B)
[7] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[9] -1 0x0000d800 - 0x0000d81f (0x20) IX[B]
[10] -1 0x0000e000 - 0x0000e03f (0x40) IX[B]
[11] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[12] -1 0x0000e800 - 0x0000e80f (0x10) IX[B]
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xfbfdf000 - 0xfbfdffff (0x1000) MX[B]
[6] -1 0xfb000000 - 0xfb7fffff (0x800000) MX[B](B)
[7] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[9] -1 0x0000d800 - 0x0000d81f (0x20) IX[B]
[10] -1 0x0000e000 - 0x0000e03f (0x40) IX[B]
[11] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[12] -1 0x0000e800 - 0x0000e80f (0x10) IX[B]
(II) Loading sub module "atimisc"
(II) LoadModule: "atimisc"
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 6.4.8
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xfbfdf000 - 0xfbfdffff (0x1000) MX[B]
[6] -1 0xfb000000 - 0xfb7fffff (0x800000) MX[B](B)
[7] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[8] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[9] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0x0000d800 - 0x0000d81f (0x20) IX[B]
[13] -1 0x0000e000 - 0x0000e03f (0x40) IX[B]
[14] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[15] -1 0x0000e800 - 0x0000e80f (0x10) IX[B]
[16] 0 0x000002ec - 0x000003fc IS[S]
[17] 0 0x000001ce - 0x0000f3fe IS[S]
[18] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[19] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(==) ATI(0): Chipset: "ati".
(==) ATI(0): Depth 8, (==) framebuffer bpp 8
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) ATI(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) ATI(0): VESA BIOS detected
(II) ATI(0): VESA VBE Version 1.2
(II) ATI(0): VESA VBE Total Mem: 2048 kB
(II) ATI(0): VESA VBE OEM: ATI MACH64
(WW) System lacks support for changing MTRRs
(--) ATI(0): ATI 88800GX-D graphics controller detected.
(--) ATI(0): Chip type 4758 "GX", class 0, revision 0x01.
(--) ATI(0): PCI bus interface detected; sparse I/O base is 0x02EC.
(--) ATI(0): VGA Wonder registers at I/O port 0x01CE.
(--) ATI(0): ATI Mach64 adapter detected.
(--) ATI(0): Chrontel 8398 or similar RAMDAC detected.
(==) ATI(0): RGB weight 666
(==) ATI(0): Default visual is PseudoColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using Mach64 accelerator CRTC.
(II) ATI(0): Using 4 MB linear aperture at 0xFB000000.
(II) ATI(0): Using Block 0 MMIO aperture at 0xFB3FFC00.
(II) ATI(0): MMIO write caching enabled.
(--) ATI(0): 2048 kB of DRAM (256Kx4) detected.
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(--) ATI(0): Chrontel 8398 or similar programmable clock generator detected.
(--) ATI(0): Reference clock 157.5/11 (14.318) MHz.
(II) ATI(0): Monitor0: Using hsync range of 30.00-68.00 kHz
(II) ATI(0): Monitor0: Using vrefresh range of 50.00-100.00 Hz
(II) ATI(0): Clock range: 2.00 to 80.00 MHz
(II) ATI(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) ATI(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) ATI(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) ATI(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) ATI(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) ATI(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) ATI(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) ATI(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) ATI(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) ATI(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) ATI(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) ATI(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1600x1024" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(--) ATI(0): Virtual size is 1024x768 (pitch 1024)
(**) ATI(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) ATI(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync
+vsync
(==) ATI(0): DPI set to (75, 75)
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xfb000000 - 0xfb7fffff (0x800000) MS[B]
[1] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[2] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0xfbfdf000 - 0xfbfdffff (0x1000) MX[B]
[7] -1 0xfb000000 - 0xfb7fffff (0x800000) MX[B](B)
[8] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[9] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[10] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0x0000d800 - 0x0000d81f (0x20) IX[B]
[14] -1 0x0000e000 - 0x0000e03f (0x40) IX[B]
[15] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[16] -1 0x0000e800 - 0x0000e80f (0x10) IX[B]
[17] 0 0x000002ec - 0x000003fc IS[S]
[18] 0 0x000001ce - 0x0000f3fe IS[S](OprU)
[19] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[20] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) ATI(0): Largest offscreen areas (with overlaps):
(II) ATI(0): 1024 x 1280 rectangle at 0,768
(II) ATI(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
12 256x256 slots
(==) ATI(0): Backing store disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "Microsoft"
(**) Mouse0: Protocol: "Microsoft"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Option "BaudRate" "1200"
(**) Option "StopBits" "1"
(**) Option "DataBits" "7"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "0"
(**) Option "FlowControl" "None"
(==) Mouse0: Buttons: 3
(**) Mouse0: BaudRate: 1200
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Option "BaudRate" "1200"
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
