Hello All,
Wonder if anyone could help me solve a blocking problem
that is not allowing me to use X.
I have successfully configured dualhead and am currently
running "X" with dualhead support. I intended to configure
the same on another machine and almost succeeded...Almost !
The new machine successfully generates the XF86Config file.
Strangely, the XFree86 version is "4.1.0", but the config
file it uses is /etc/X11/XF86Config; NOT /etc/X11/XF86Config-4.
This is not a serious problem, though.
The dualhead actually comes up. The Server Layout also
appears to be fine.
Problem : The "X" starts on both screens. The "X" cursor shows
up on Screen 0. But, moving the cursor to the right/left does
not move the cursor to the other screen !
- Any ideas ?
- I might be missing something........
- Please do let me know of any suggestions to close this blocking
problem.
The XF86Config file looks like this :
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "pex5"
Load "record"
Load "xie"
Load "int10"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/mouse"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Acer"
ModelName "76ie"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Acer"
ModelName "54eL"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "accel" # [<bool>]
#Option "crt_screen" # [<bool>]
#Option "composite_sync" # [<bool>]
#Option "linear" # [<bool>]
#Option "mmio_cache" # [<bool>]
#Option "probe_clocks" # [<bool>]
#Option "reference_clock" # <freq>
#Option "shadow_fb" # [<bool>]
Identifier "Card0"
Driver "ati"
VendorName "ATI"
BoardName "Mach64 GB"
# ChipSet "ati"
# ChipId 0x4742
# ChipRev 0x5c
BusID "PCI:1:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
Identifier "Card1"
Driver "vesa"
VendorName "S3"
# BoardName "Trio32/64"
BusID "PCI:0:11:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
# SubSection "Display"
# Depth 1
# EndSubSection
# SubSection "Display"
# Depth 4
# EndSubSection
SubSection "Display"
Depth 8
EndSubSection
# SubSection "Display"
# Depth 15
# EndSubSection
# SubSection "Display"
# Depth 16
# EndSubSection
# SubSection "Display"
# Depth 24
# EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
# SubSection "Display"
# Depth 1
# EndSubSection
# SubSection "Display"
# Depth 4
# EndSubSection
SubSection "Display"
Depth 8
EndSubSection
# SubSection "Display"
# Depth 15
# EndSubSection
SubSection "Display"
Depth 16
EndSubSection
# SubSection "Display"
# Depth 24
# EndSubSection
EndSection
**************************Disclaimer************************************
Information contained in this E-MAIL being proprietary to Wipro Limited
is 'privileged' and 'confidential' and intended for use only by the
individual or entity to which it is addressed. You are notified that any
use, copying or dissemination of the information contained in the E-MAIL
in any manner whatsoever is strictly prohibited.
********************************************************************
