[Newbie]No test pattern with XFree86 4.2

Brendhan Horne Sun, 12 May 2002 15:50:03 -0700

Okay I am running 4.4.stable loaded XFree86 4.2 from a port fresh install no
previous versions of X exsisted on the machine. When I go to configure X I
am supposr to get the gray test pattern. I don't I have supplied all the
information I think may lead to a solution. If you need more let me know.

Results of # XFree86 -configure

TheBaron# XFree86 -configure

XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 January 2002
        If the server is older than 6-12 months, or if your card is
        newer than the above date, look for a newer version before
        reporting problems. (See http://www.XFree86.Org/)
Build Operating System: FreeBSD 4.4 i386 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sat May 11 16:45:55 2002
List of video drivers:
        atimisc
        r128
        radeon
        mga
        glint
        nv
        tga
        s3
        s3virge
        sis
        rendition
        neomagic
        i740
        tdfx
        savage
        cirrus
        vmware
        tseng
        trident
        chips
        apm
        fbdev
        i128
        ati
        i810
        ark
        cyrix
        siliconmotion
        vesa
        vga
(++) Using config file: "/root/XF86Config.new"

XFree86 detected your mouse at device /dev/mouse.
Please check your config if the mouse is still not
operational, as by default XFree86 tries to autodetect
the protocol.

Your XF86Config file is /root/XF86Config.new

To test the server, run 'XFree86 -xf86config /root/XF86Config.new'

And then we do this:

# # XFree86 -xf86config /root/XF86Config.new

XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 January 2002
        If the server is older than 6-12 months, or if your card is
        newer than the above date, look for a newer version before
        reporting problems. (See http://www.XFree86.Org/)
Build Operating System: FreeBSD 4.4 i386 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sat May 11 16:48:22 2002
(++) Using config file: "/root/XF86Config.new"

This is what is the text behind the screen.

If I do this:
#ee XF86Config.new
This is the result:

Section "ServerLayout"
        Identifier     "XFree86 Configured"
        Screen      0 "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        ModulePath   "/usr/X11R6/lib/modules"
        FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
        FontPath     "/usr/X11R6/lib/X11/fonts/Speedo/"
        FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
        FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
        FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
        Load "extmod"
        Load "xie"
        Load "pex5"
        Load "glx"
        Load "dri"
        Load "dbe"
        Load "record"
        Load "xtrap"
        Load "speedo"
        Load "type1"
EndSection

Section "InputDevice"
        Identifier "Keyboard0"
        Driver      "keyboard"
EndSection

Section "InputDevice"
        Identifier "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/mouse"
EndSection

Section "Monitor"
        #DisplaySize      300   230     # mm
        Identifier   "Monitor0"
        VendorName   "NOK"
        ModelName    "Nokia 447Za"
        Option      "DPMS"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "accel"                     # [<bool>]
        #Option     "crt_screen"                # [<bool>]
        #Option     "composite_sync"            # [<bool>]
        #Option     "hw_cursor"                 # [<bool>]
        #Option     "linear"                    # [<bool>]
        #Option     "mmio_cache"                # [<bool>]
        #Option     "probe_clocks"              # [<bool>]
        #Option     "reference_clock"           # <freq>
        #Option     "shadow_fb"                 # [<bool>]
        #Option     "sw_cursor"                 # [<bool>]
        Identifier "Card0"
        Driver      "ati"
        VendorName "ATI"
        BoardName   "Mach64 VT"
        ChipSet     "ati"
        ChipId      0x5654
        ChipRev     0x40
        BusID       "PCI:0:17:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        SubSection "Display"
                Depth     1
        EndSubSection
       SubSection "Display"
                Depth     4
        EndSubSection
        SubSection "Display"
                Depth     8
        EndSubSection
        SubSection "Display"
                Depth     15
        EndSubSection
        SubSection "Display"
                Depth     16
        EndSubSection
        SubSection "Display"
                Depth     24
        EndSubSection
EndSection

Okay so what am I doing wrong.?

Thanks
Brendhan

[Newbie]No test pattern with XFree86 4.2

Reply via email to