I seem to be having a problem migrating to the newest release of X.
The machine is a Toshiba Tecra 700CS with a Chips and Technologies
65548. Previously the box was running slackware 7.1, with XFree86 3.3.6
I believe. The display was able to hit 800x600, 16bpp. I have since
removed that operating system and have installed linux from scratch,
with X 4.2.1. Kernel configuration is basically the same. The only
hardware change was the addition of a 3com pcmcia nic.
There are quite a few differences in the configuration. When I got
it to start up it was only hitting 640x480. If I reduced it to 8bpp I
could do 800x600. By adding the "videoram 2048" option I could do
800x600 with 16bpp. The card I believe only has 1M of ram, but was able
to do this before. Currently I can get it to boot up in 800x600 16bpp,
but it will only last for about 10 minutes until the machine hard-locks.
Any information would be appriciated.
New Config:
Section "Device"
Identifier "ct65548"
VendorName "unknown"
BoardName "Toshiba Tecra"
Driver "chips"
Videoram 2048
EndSection
Section "Screen"
Identifier "Screen 1"
Device "ct65548"
Monitor "TFTcolor"
DefaultColorDepth 16
SubSection "Display"
Depth 16
Modes "800x600"
EndSubSection
EndSection
Old Config:
Section "Device"
Identifier "ct65550"
VendorName "Unknown"
BoardName "Toshiba Tecra"
EndSection
Section "Screen"
Driver "svga"
Device "ct65548"
Monitor "TFTcolor"
DefaultColorDepth 16
SubSection "Display"
Depth 16
Modes "800x600"
EndSubSection
EndSection
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
