oooohh K. where do you buy it? locally. is there a web site for the oil itself and not some second party distrubuter?
--- On Wed, 3/18/09, Josh Bowlin <[email protected]> wrote: > From: Josh Bowlin <[email protected]> > Subject: [Nighthawk Lovers] Re: Choke not operating properly > To: [email protected] > Date: Wednesday, March 18, 2009, 8:51 AM > Ok the story behind me and gibbs is as follows. My dad and > i run antique > gas engines. When I was 10 we were at our summer show and > there was a gentle > men who gave my father a 4oz sample can. At that point and > time my father > had just restored a john deer tractor and the throttle was > sticking sooo bad > that he would have to ball up a fist and knock on it pretty > hard to get the > tractor to idle faster, and he would have to hit it hard > several times to > get it to rev the motor up. Well he tried all kinds of > things, WD-40, oil, > grease, etc..well he sprayed some gibbs on it and we were > both like Meh it > wont work... Well as most things we got busy and it sat for > a day or two, > then we went out and fired up the tractor, my dad reached > up with a balled > fist and knocked on the throttle like he normally would and > damn > near broke the throttle off the tractor. Since that day i > have lived by the > stuff. You can use it as a lubricant, a cleaner, a > rubber/plastic > protectant, we have used it like ether to make an engine > fire, we have > polished chrome and metal with it, it prevents rust. We > have sprayed it on > distributers and it works as a waterproofer. Now i dont > know how many of > you know how a distrubutor works on an engine but if they > get wet they are > royally screwed till they dry out. Well im confident > enough (and ive done > it before) that i willl spray down the distributer with > gibbs and then dump > a bucket of water on it with the engine/motor running and > guarantee it wont > miss a lick. So in other words I replaced my can of WD-40 > about 13 years > ago and use the gibbs for what it could do and then some. > if you have > any other types of questions about it just ask lol. > > On Wed, Mar 18, 2009 at 8:37 AM, Creative Residential > Designs < > [email protected]> wrote: > > > Hey Josh...how does the Gib's compare to WD-40? I > live by WD-40 and keep > > a can next to my bike at all times. I anoint my bikes > from top to bottom > > with a rag o' WD-40 chrome and all. It stops rust > on my chrome dead in it's > > tracks along with all of it's other applications. > I'm always open to try a > > new thing though. HotrodMamma. > > > > ----- Original Message ----- > > *From:* Josh Bowlin <[email protected]> > > *To:* [email protected] > > *Sent:* Wednesday, March 18, 2009 7:03 AM > > *Subject:* [Nighthawk Lovers] Re: Choke not operating > properly > > > > http://threepeaksproducts.com/products/gibbslube/ > > > > On Wed, Mar 18, 2009 at 8:02 AM, Josh Bowlin > <[email protected]> wrote: > > > >> I use a product called Gib's, something i live > by. But if you dont have > >> any you can always try to put some wd-40 on the > choke cable to make sure its > >> lubed correctly or you can check to make sure its > not getting stuck up on > >> the carbs or just pure and simple stuck on the > carbs. Also try some wd-40 > >> on the working mechanism on the carbs. > >> > > > > > > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en -~----------~----~----~----~------~----~------~--~---
