before i pay exorbitant shipping I'll try some local Harley sources here in 
Milwaukee.  They are a customer and maybe one of the engineers I work with will 
know how to skin the cat...


--- On Wed, 3/18/09, Josh Bowlin <[email protected]> wrote:

> From: Josh Bowlin <[email protected]>
> Subject: [Nighthawk Lovers] Re: Choke not operating properly
> To: [email protected]
> Date: Wednesday, March 18, 2009, 1:11 PM
> in one of the posts i posted a link, thats the link that i
> will probably buy
> my next case off of.  its 110 for 12 cans, but again, i
> cant stress how much
> it is worth it.
> 
> On Wed, Mar 18, 2009 at 12:35 PM, Mark Hasslinger
> <[email protected]>wrote:
> 
> >
> >
> > oooohh K.  where do you buy it? locally.  is there a
> web site for the oil
> > itself and not some second party distrubuter?
> >
> >
> > --- On Wed, 3/18/09, Josh Bowlin
> <[email protected]> wrote:
> >
> > > From: Josh Bowlin <[email protected]>
> > > Subject: [Nighthawk Lovers] Re: Choke not
> operating properly
> > > To: [email protected]
> > > Date: Wednesday, March 18, 2009, 8:51 AM
> >  > Ok the story behind me and gibbs is as follows. 
> My dad and
> > > i run antique
> > > gas engines. When I was 10 we were at our summer
> show and
> > > there was a gentle
> > > men who gave my father a 4oz sample can.  At that
> point and
> > > time my father
> > > had just restored a john deer tractor and the
> throttle was
> > > sticking sooo bad
> > > that he would have to ball up a fist and knock on
> it pretty
> > > hard to get the
> > > tractor to idle faster, and he would have to hit
> it hard
> > > several times to
> > > get it to rev the motor up.  Well he tried all
> kinds of
> > > things, WD-40, oil,
> > > grease, etc..well he sprayed some gibbs on it and
> we were
> > > both like Meh it
> > > wont work... Well as most things we got busy and
> it sat for
> > > a day or two,
> > > then we went out and fired up the tractor, my dad
> reached
> > > up with a balled
> > > fist and knocked on the throttle like he normally
> would and
> > > damn
> > > near broke the throttle off the tractor.  Since
> that day i
> > > have lived by the
> > > stuff.  You can use it as a lubricant, a cleaner,
> a
> > > rubber/plastic
> > > protectant, we have used it like ether to make an
> engine
> > > fire, we have
> > > polished chrome and metal with it, it prevents
> rust.  We
> > > have sprayed it on
> > > distributers and it works as a waterproofer.  Now
> i dont
> > > know how many of
> > > you know how a distrubutor works on an engine but
> if they
> > > get wet they are
> > > royally screwed till they dry out.  Well im
> confident
> > > enough (and ive done
> > > it before) that i willl spray down the
> distributer with
> > > gibbs and then dump
> > > a bucket of water on it with the engine/motor
> running and
> > > guarantee it wont
> > > miss a lick.  So in other words I replaced my can
> of WD-40
> > > about 13 years
> > > ago and use the gibbs for what it could do and
> then some.
> > >     if you have
> > > any other types of questions about it just ask
> lol.
> > >
> > > On Wed, Mar 18, 2009 at 8:37 AM, Creative
> Residential
> > > Designs <
> > > [email protected]> wrote:
> > >
> > > >  Hey Josh...how does the Gib's compare
> to WD-40? I
> > > live by WD-40 and keep
> > > > a can next to my bike at all times. I anoint
> my bikes
> > > from top to bottom
> > > > with a rag o' WD-40 chrome and all. It
> stops rust
> > > on my chrome dead in it's
> > > > tracks along with all of it's other
> applications.
> > > I'm always open to try a
> > > > new thing though. HotrodMamma.
> > > >
> > > >   ----- Original Message -----
> >  > > *From:* Josh Bowlin
> <[email protected]>
> > > > *To:* [email protected]
> > > > *Sent:* Wednesday, March 18, 2009 7:03 AM
> > > > *Subject:* [Nighthawk Lovers] Re: Choke not
> operating
> > > properly
> > > >
> > > >
> http://threepeaksproducts.com/products/gibbslube/
> > > >
> > > > On Wed, Mar 18, 2009 at 8:02 AM, Josh Bowlin
> > > <[email protected]> wrote:
> > > >
> > > >> I use a product called Gib's,
> something i live
> > > by.  But if you dont have
> > > >> any you can always try to put some wd-40
> on the
> > > choke cable to make sure its
> > > >> lubed correctly or you can check to make
> sure its
> > > not getting stuck up on
> > > >> the carbs or just pure and simple stuck
> on the
> > > carbs.  Also try some wd-40
> > > >> on the working mechanism on the carbs.
> > > >>
> > > >
> > > > >
> > > >
> > >
> > >
> >
> > >
> >
> 
> 

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/nighthawk_lovers?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to