OK, I need help. I am trying to get my 83 Nighthawk 650 back together. I took the tank and all the plastic off for paint, then also took a few other parts off just to clean 26 years worth of dirt off it. Whoever owned this thing before me just drove it and didn't bother to do much cleaning. My problem is the ignition coils. I took it off and took it apart (not competely) to get all of the dirt out of the small spaces in there. Cleaned up nice. However, I did not pay much attention to which plug went to which coil. Now, the plug wires are labeled nicely. With each plug saying which coil it goes to and which cylinder it goes to. I know that the cylinders are number 1-4 from left to right (left being the left side of the bike if you are sitting on the seat facing forward). However, I cannot for the life of me find a diagram telling me which coil plug is which. Basically it is two coils side by side. Each coil has a two plugs on the back (facing towards the back of the bike when mounted on the bike), one plug on top, one plug on bottom. 4 plugs total. Anyone able to tell me which number each one is? Thanks so much!
MN Blue --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en -~----------~----~----~----~------~----~------~--~---
