Does anybody know whether it's the same for the NH700S?

On May 23, 2009, at 11:16 PM, Minnesota Blue wrote:

>
> All you need to do is remove the tank and the coils. I never would
> have attempted it if I had to take the engine out.  I am nowhere near
> ready for that!  Have to be a little careful getting it up and over
> the valves as you take it off, but that is it.  Just don't do what I
> did.  When you take the coils off, don't take them apart and not mark
> anything!! It was an adventure figuring out how to get it back
> together correctly!
>
> On May 23, 9:59 pm, Graham Rogers <[email protected]> wrote:
>> I want to know whether you can remove the valve cover without
>> removing the engine from the frame.  Does it just require removing
>> the tank? Graham
>>
>> On May 23, 2009, at 10:43 PM, Minnesota Blue wrote:
>>
>>
>>
>>> Hello everyone.  So the 83 650 is back together and running!!  New
>>> paint, several new nuts, bolts, gaskets, washers, o-rings, and a few
>>> other things later.  Spent a long time getting 26 years of dirt and
>>> neglect out of all the small spaces.  Back to running like a  
>>> champ now
>>> except for one problem.  The valve cover is still leaking.  We had
>>> pulled it off this winter, cleaned the surfaces, and put a new  
>>> gasket
>>> in.  My father even surprised me by getting the valve cover chromed,
>>> which looks really nice!  Fired up the bike today and took it for a
>>> test drive.  Sure enough, it was pumping oil out in a few spots.   
>>> Took
>>> the tank off and re-torqued the whole thing. Went for another drive,
>>> still leaking.  Not as bad, but still leaking. I really don't  
>>> want to
>>> torque the hell out of them.  My mechanic told me to put the new
>>> gasket on dry.   With the leaks, I am thinking about taking it  
>>> off and
>>> putting a gasket sealer on to seal up all of the leaks.  Anyone been
>>> through this?  I am sure the gasket sealer will work, but I don't  
>>> want
>>> to cause problems for myself down the road,  Any suggestions  
>>> would be
>>> great.
>>
>>> Thanks!
>>
>>> MN Blue
> >
>


--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/nighthawk_lovers?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to