There is an adaptor (have seen them on ebay) that you can get to run two wire signals on the front of your bike and have the running lights option. Check some of the auctions for the two wire lights then look at the sellers ebay store.
On Aug 30, 1:16 am, Dennis Hammerl <[email protected]> wrote: > With a two wire light, you can have either turn signals or running lights. > Not both. > Flasher ? Takes a different set-up for LED bulbs. Check the web-sites that > sell LED bulbs for automotive use. > > --- On Sat, 8/29/09, stormcrow75 <[email protected]> wrote: > > From: stormcrow75 <[email protected]> > Subject: [Nighthawk Lovers] Aftermarket Turn Sugnals for 85 CB700sc > To: "Nighthawk Motorcycle Lovers!" <[email protected]> > Date: Saturday, August 29, 2009, 6:43 PM > > Now i have found after market turn signals but they are two wire turn > signals. Is it possible to take a two wire turn signal and be able to > use it on the front of the bike? Is it possible to use L.E.D. turn > signals on the rear or would i need to buy a different flasher for the > bike? --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en -~----------~----~----~----~------~----~------~--~---
