Sep 7, 2009 09:49:59 PM, [email protected] wrote:
I have the same problem with my 550. If you go to Paul's page http://hondanighthawks.net/550.htm on the 550 where there is a article from 83 test ride of the NH550 it states there you had to use the choke quite a bit on these bikes. Even running with choke on for a few miles till the bike "cleared out" don't take my word read the article let me know what you think of the article. Ride safe Derby
--- On Sun, 9/6/09, [email protected] <[email protected]> wrote:
From: [email protected] <[email protected]>
Subject: [Nighthawk Lovers] Re: I have to use the choke to start the 550 hot or cold
To: [email protected]
Date: Sunday, September 6, 2009, 7:07 PM
I ride all year in 10-degree's to 100
Sep 6, 2009 01:10:19 PM, [email protected] wrote:
I have the same problem with my 83 550. I have noticed it has a direct link to the weather. If it is hot an dry they work right off the bat. If it is cool or a little moisture in the air it takes them longer to work. I believe my flasher relay has moisture in it or is getting moisture in it. They always work eventually Ride safe Derby
--- On Sun, 9/6/09, Kyle Munz <[email protected]> wrote:
From: Kyle Munz <[email protected]>
Subject: [Nighthawk Lovers] Re: Blinker problem
To: [email protected]
Date: Sunday, September 6, 2009, 1:24 PM
The salvage yard I got mine from tested it for me before I bought it ;)
-Kyle
On Sun, Sep 6, 2009 at 11:28 AM, <[email protected]> wrote:
I'll 2nd the relay motion - I had to get one myselfI made the mistake of getting one at a slavage yard that didn't work.I wasn't aware that it made a clicking sound when it worked properly.I wasted a lot of time troubleshooting for nothingProbably the relay under the left side cover. Around $40 from your local Honda dealer, A direct replacement part, fits exactly.
On Fri, Sep 4, 2009 at 12:01 PM, <[email protected]> wrote:
Hello all,I am new to the site and looking forward to being part of this group. I have a 85 650sc NH that has some problems with the blinkers. The blinkers will work intermittently.They never work right away but usually after 3-4 minutes they decide to work. Sometimes they don't go on at all. Could this be a switch issue or a wiring issue? Looking for any info you can give me.Thanks
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [email protected]
For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en
-~----------~----~----~----~------~----~------~--~---
