Good luck! --- On Wed, 7/7/10, Joey Kelley <[email protected]> wrote:
> From: Joey Kelley <[email protected]> > Subject: Re: [Nighthawk Lovers] I was given a windshield today..... > To: [email protected] > Date: Wednesday, July 7, 2010, 10:35 PM > Rusty, > Thanks! > The setup on this > windshield is different - appears to be a > quick remove mounting from a Sportster. I have got to > support the > bracket somehow. I'll look at it again in the morning, with > the light > and see what if anything clicks into place. > Thanks again! > -Joey > > On Wed, Jul 7, 2010 at 10:25 PM, Rusty Fairmount > <[email protected]> > wrote: > > > > 3 photos attached. > > > > First one is my bike "Sick4Cycle" fully dressed for a > long distance highway ride. The next two photos are > close-ups of the mounting rods and the cable ties used to > secure the shield. > > > > I believe the "viper" shield was designed for bikes > with round headlamps. When the wind presses against the > top of the shield, it pivots slightly on the arms. The > bottom of the shield should be held in place by the round > headlamp in front of it. But...with the 83 the headlamp is > square. So I needed a way to hold the bottom down. > > > > I used an etching tool to carve 2 eliptical holes > through which cable ties are passed through and run around > the turn signal arms. I used an etching tool rather than a > drill bit to prevent the bit from jumping, possibly > scratching or even shattering the glass. > > > > Good luck. > > > > --- On Wed, 7/7/10, Joey Kelley <[email protected]> > wrote: > > > >> From: Joey Kelley <[email protected]> > >> Subject: Re: [Nighthawk Lovers] I was given a > windshield today..... > >> To: [email protected] > >> Date: Wednesday, July 7, 2010, 10:04 PM > >> Please do! > >> -Joey > >> > >> On Wed, Jul 7, 2010 at 10:03 PM, Rusty Fairmount > >> <[email protected]> > >> wrote: > >> > on mine, the brackets mount on the bars. > can send > >> photo if you likel > >> > -----Original Message----- > >> > Date: Wednesday, July 07, 2010 10:02:24 pm > >> > To: [email protected] > >> > From: "Joey Kelley" <[email protected]> > >> > Subject: Re: [Nighthawk Lovers] I was given > a > >> windshield today..... > >> > > >> > Ironically - that was one of my thoughts as > well.... > >> > Where did you support the > other half of > >> the brackets? > >> > -Joey > >> > > >> > On Wed, Jul 7, 2010 at 9:59 PM, Rusty > Fairmount > >> > <[email protected]> > >> wrote: > >> >> dont underestimate the power of cable > ties. my > >> viper shield woks on my 83 650sc by using two > cable ties to > >> fasten the lower part of the shield to the turn > signals. > >> >> -----Original Message----- > >> >> Date: Wednesday, July 07, 2010 9:44:49 > pm > >> >> To: [email protected] > >> >> From: "Joey Kelley" <[email protected]> > >> >> Subject: [Nighthawk Lovers] I was given > a > >> windshield today..... > >> >> > >> >> Only problem is... > >> >> Its for a HD Sportster. > >> >> I think with enough duct tape, > wire > >> tires, bailing wire, > >> >> chewing gum I can attach it to the 450. > >> >> Before I start that, does anyone > else > >> have an ideas? > >> >> -Joey > >> >> > >> >> -- > >> >> -Joey Kelley > >> >> > >> > > >> > -- > >> > You received this message because you are > subscribed > >> to the Google Groups "Nighthawk Motorcycle > Lovers!" group. > >> > To post > >> > > >> > -- > >> > You received this message because you are > subscribed > >> to the Google Groups "Nighthawk Motorcycle > Lovers!" group. > >> > To post to this group, send email to [email protected]. > >> > To unsubscribe from this group, send email > to > >> [email protected]. > >> > For more options, visit this group at > >> > http://groups.google.com/group/nighthawk_lovers?hl=en. > >> > > >> > > >> > >> > >> > >> -- > >> -Joey Kelley > >> Need Computer Technical support? > >> http://www.crossloop.com/JoeyKelleyComputerServices > >> At your service - via remote control! > >> > >> -- > >> You received this message because you are > subscribed to the > >> Google Groups "Nighthawk Motorcycle Lovers!" > group. > >> To post to this group, send email to [email protected]. > >> To unsubscribe from this group, send email to > >> [email protected]. > >> For more options, visit this group at > >> http://groups.google.com/group/nighthawk_lovers?hl=en. > >> > >> > > > > > > > > > > -- > > You received this message because you are subscribed > to the Google Groups "Nighthawk Motorcycle Lovers!" group. > > To post to this group, send email to [email protected]. > > To unsubscribe from this group, send email to > [email protected]. > > For more options, visit this group at > > http://groups.google.com/group/nighthawk_lovers?hl=en. > > > > > > > > -- > -Joey Kelley > Need Computer Technical support? > http://www.crossloop.com/JoeyKelleyComputerServices > At your service - via remote control! > > -- > You received this message because you are subscribed to the > Google Groups "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
