*Do you have a final photo on this design? * *[email protected]*
On Fri, Jul 9, 2010 at 8:40 AM, <[email protected]> wrote: > I just realized that I attached the wrong PDF's these are the correct > ones. > > > Thank you, > Christopher López > > PSI Designer > Synthes CMF-PSI > 1301 Goshen Parkway > West Chester, PA 19380 > > Phone: 610-719-6841 > Fax: 610-719-6533 > [email protected] > S > > > ------------------------------ > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of * > [email protected] > *Sent:* Friday, July 09, 2010 10:34 AM > > *To:* [email protected] > *Subject:* RE: [Nighthawk Lovers] Mounting a GPS > > Hi All, > > As I promised I have attached PDF's of the GPS mounting case. This is > designed in mm, you will need to convert it into inches. The diameter for > the handle bar will have to be custom cut to your size handle bar. When > designing it I found it cheaper making it out off wood and just routing and > drilling the wood in stead of making it out of PVC. If you purchase a 5/4" x > 6" x 8' you will have more then enough to make one and enough to screw up > with. When looking at the GPS Base there are 4 sets of holes 1" from the > corners this is where you will be placing elastic bands at ( I found that > girls hair band work great in the past). If you have any questions feel > free ask. By the way the total cost will be under $20 > > Chris > > > ------------------------------ > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *[email protected] > *Sent:* Wednesday, July 07, 2010 6:49 PM > *To:* [email protected] > *Subject:* [Nighthawk Lovers] Mounting a GPS > > <<I was a little concerned about mounting my GPS on the windshield as > it's > not perfectly flat and I was concerned about getting good suction. I > went out the morning and had a brain flash. Why not just mount it on the > flat speedo? >> > > Smart idea! I mounted my Magellan 1212 on the tach glass (the %#%# tach > doesn't work anyway) and it fits perfectly. The mount doesn't even cover up > the warning lights. But the added weight causes the whole assembly to > vibrate, so a shim is needed between the tach and the turn signal light > plate to firm things up. > > Just tried it around the block, but it does seem secure and works well. > > Jay S > 92 NH750 > South Florida > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]<nighthawk_lovers%[email protected]> > . > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]<nighthawk_lovers%[email protected]> > . > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]<nighthawk_lovers%[email protected]> > . > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
