Dealership if they still can get'em or one of the online places such as bike bandit.
-Kyle On Tue, Aug 3, 2010 at 9:28 PM, NghthwkLvr (NL) <[email protected]>wrote: > ok...that's what i figured...just wanted to make sure... > > next question....where's the best place to find these gaskets > > > > On Aug 3, 9:02 pm, Kyle Munz <[email protected]> wrote: > > If that gasket has hardened over the decades and is no longer springy, or > > simply not seated properly then it needs replacing. No short cuts > > unfortunately, except maybe thicker fuel? nah... If you don't have a heat > > gun anymore, and regular household hair dryer works too, it just takes > > longer. > > > > -Kyle > > > > On Tue, Aug 3, 2010 at 7:29 PM, NghthwkLvr (NL) <[email protected] > >wrote: > > > > > > > > > ok...so on saturday night with limited tools available I went and did > > > what i could to the NH... > > > > > i loosened and re-tightened the 'oil feed pipe' connections...and > > > apparently resolved that oil flow... now... > > > > > i got a new leak...I recently removed and thoroughly cleaned the > > > carbs...and now there is fuel leaking out of the edges of the fuel > > > bowls...so > > > > > how can i resolve this leak...without removing the carbs...i kinda > > > hesitate doing that since my heat gun (which i use to reinstall the > > > air boots) was among the tools that were stolen > > > > > can I just tighten the bowls? > > > > > can I put some type of sealant around the bowls? > > > > > or should/do I need to replace the little black gasket around the > > > bowls? > > > > > is there a quick fix or not? > > > > > thanks guys > > > > > -NghthwkLvr- > > > > > -- > > > You received this message because you are subscribed to the Google > Groups > > > "Nighthawk Motorcycle Lovers!" group. > > > To post to this group, send email to [email protected] > . > > > To unsubscribe from this group, send email to > > > [email protected]<nighthawk_lovers%[email protected]><nighthawk_lovers%2Bunsubscrib > [email protected]> > > > . > > > For more options, visit this group at > > >http://groups.google.com/group/nighthawk_lovers?hl=en. > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]<nighthawk_lovers%[email protected]> > . > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
