Thanks for the info Graham. Now I have to figure out how to take the exhaust out. One of the bolts won't is stuck and I am afraid of putting to much pressure and brake it. Any ideas?
Javier. On Tue, Nov 30, 2010 at 9:41 AM, Graham Rogers <[email protected]> wrote: > I've found the most important part is removing all the rust > > > On Nov 30, 2010, at 9:25 AM, [email protected] wrote: > > i was going to use bbq paint on the pipes and mufflers on the 250 (just >> rusted up pretty good). At the time i had a job where we had a blast cabinet >> almost large enough to put 1 side in at a time in and clean them up that >> way, wasent going to prime or sand, just clean it up good, spray bomb, and >> let it cure on the bike on the 45 min ride home.... Just never got around to >> it >> >> >> >> -----Original Message----- >> Date: Tuesday, November 30, 2010 8:14:47 am >> To: [email protected] >> From: "Graham Rogers" <[email protected]> >> Subject: Re: [Nighthawk Lovers] Re: Black Chrome exhaust pipes for 700-S >> (restoration) >> >> Javier, I've never had any peel off but I don't use primer, >> specially regular primer. Maybe high heat primer would work but >> regular wouldn't. I've used NAPA high heat, even Walmart's brand and >> they all work. I use flat on exhausts (1200 degree plus) and semi >> gloss or gloss (500 degree plus) on the mufflers. Sometimes as >> someone commented black turns somewhat grey - depending on the brand >> and I prefer a slight sheen on the exhausts and so some flats do >> that. Stove or BBQ paint works as well, Graham >> >> On Nov 29, 2010, at 11:01 PM, Javier Garcia wrote: >> >> Graham, do you remember the names of any of the good brands? We >>> painted the exhaust on the Suzuki, I don't if it was the primer or >>> the paint, but it started to pill off right away. >>> >>> Javier. >>> >>> On Mon, Nov 29, 2010 at 10:31 PM, Graham Rogers <[email protected]> >>> wrote: >>> I've used to different brands of high heat paint on exhausts. Some >>> work really well, others not so well. Joe, I know, would rather >>> >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "Nighthawk Motorcycle Lovers!" group. >> To post to this group, send email to [email protected]. >> To unsubscribe from this group, send email to >> [email protected]<nighthawk_lovers%[email protected]> >> . >> For more options, visit this group at >> http://groups.google.com/group/nighthawk_lovers?hl=en. >> >> >> > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]<nighthawk_lovers%[email protected]> > . > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
