PB Blaster is generally considered better than WD - another good one
(although not widely available) is Gibbs - which also doubles as a
starting fluid that doesn't wash oil down the cylinder walls like
ether will.
-Joey
On Tue, Nov 30, 2010 at 10:11 AM, Javier Garcia <[email protected]> wrote:
> Is P'Blaster better than WD-40 in this case, or are they about the same?
> Javier.
>
> On Tue, Nov 30, 2010 at 9:54 AM, Kurt Nolte <[email protected]>
> wrote:
>>
>> A daily squirt of your favorite penetrating oil for a week? That's usually
>> worked wonders for me.
>>
>> My preferred bolt-and-nut-unstucker is P'Blaster, though I have in the
>> past used the full gamut of stuff.
>>
>> -Kurt
>>
>> On Tue, Nov 30, 2010 at 9:52 AM, Javier Garcia <[email protected]>
>> wrote:
>>>
>>> Thanks for the info Graham. Now I have to figure out how to take the
>>> exhaust out. One of the bolts won't is stuck and I am afraid of putting to
>>> much pressure and brake it. Any ideas?
>>>
>>> Javier.
>>>
>>> On Tue, Nov 30, 2010 at 9:41 AM, Graham Rogers <[email protected]> wrote:
>>>>
>>>> I've found the most important part is removing all the rust
>>>>
>>>> On Nov 30, 2010, at 9:25 AM, [email protected] wrote:
>>>>
>>>>> i was going to use bbq paint on the pipes and mufflers on the 250 (just
>>>>> rusted up pretty good). At the time i had a job where we had a blast
>>>>> cabinet
>>>>> almost large enough to put 1 side in at a time in and clean them up that
>>>>> way, wasent going to prime or sand, just clean it up good, spray bomb, and
>>>>> let it cure on the bike on the 45 min ride home.... Just never got around
>>>>> to
>>>>> it
>>>>>
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> Date: Tuesday, November 30, 2010 8:14:47 am
>>>>> To: [email protected]
>>>>> From: "Graham Rogers" <[email protected]>
>>>>> Subject: Re: [Nighthawk Lovers] Re: Black Chrome exhaust pipes for
>>>>> 700-S (restoration)
>>>>>
>>>>> Javier, I've never had any peel off but I don't use primer,
>>>>> specially regular primer. Maybe high heat primer would work but
>>>>> regular wouldn't. I've used NAPA high heat, even Walmart's brand and
>>>>> they all work. I use flat on exhausts (1200 degree plus) and semi
>>>>> gloss or gloss (500 degree plus) on the mufflers. Sometimes as
>>>>> someone commented black turns somewhat grey - depending on the brand
>>>>> and I prefer a slight sheen on the exhausts and so some flats do
>>>>> that. Stove or BBQ paint works as well, Graham
>>>>>
>>>>> On Nov 29, 2010, at 11:01 PM, Javier Garcia wrote:
>>>>>
>>>>>> Graham, do you remember the names of any of the good brands? We
>>>>>> painted the exhaust on the Suzuki, I don't if it was the primer or
>>>>>> the paint, but it started to pill off right away.
>>>>>>
>>>>>> Javier.
>>>>>>
>>>>>> On Mon, Nov 29, 2010 at 10:31 PM, Graham Rogers <[email protected]>
>>>>>> wrote:
>>>>>> I've used to different brands of high heat paint on exhausts. Some
>>>>>> work really well, others not so well. Joe, I know, would rather
>>>>>>
>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "Nighthawk Motorcycle Lovers!" group.
>>>>> To post to this group, send email to [email protected].
>>>>> To unsubscribe from this group, send email to
>>>>> [email protected].
>>>>> For more options, visit this group at
>>>>> http://groups.google.com/group/nighthawk_lovers?hl=en.
>>>>>
>>>>>
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "Nighthawk Motorcycle Lovers!" group.
>>>> To post to this group, send email to [email protected].
>>>> To unsubscribe from this group, send email to
>>>> [email protected].
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/nighthawk_lovers?hl=en.
>>>>
>>>
>>> --
>>> You received this message because you are subscribed to the Google Groups
>>> "Nighthawk Motorcycle Lovers!" group.
>>> To post to this group, send email to [email protected].
>>> To unsubscribe from this group, send email to
>>> [email protected].
>>> For more options, visit this group at
>>> http://groups.google.com/group/nighthawk_lovers?hl=en.
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Nighthawk Motorcycle Lovers!" group.
>> To post to this group, send email to [email protected].
>> To unsubscribe from this group, send email to
>> [email protected].
>> For more options, visit this group at
>> http://groups.google.com/group/nighthawk_lovers?hl=en.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Nighthawk Motorcycle Lovers!" group.
> To post to this group, send email to [email protected].
> To unsubscribe from this group, send email to
> [email protected].
> For more options, visit this group at
> http://groups.google.com/group/nighthawk_lovers?hl=en.
>
--
-Joey Kelley
JoeyKelley.com - My Life Online
JoeyFixesComputers.com - Its What I Do!
JoeyKelleyPhoto.com - Photographing Today, For Tomorrow
--
You received this message because you are subscribed to the Google Groups
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/nighthawk_lovers?hl=en.
