I'm not sure, but I know that honda uses the same ignition switch across different models. My '83 650 NH has an ignition switch from an '85 Magna in it that I found in a salvage yard. Plugged right in and bolted right up. Only problem is then you have two different keys for ignition and gas.
-Kyle On Fri, Oct 14, 2011 at 3:54 PM, Chris <[email protected]>wrote: > Hi all, > > My ignition key is pooched - switching the key to the "ON" position > works *sometimes* if I wiggle it just right... > > I took it apart and put it back together, but with no improvement. It > had been taken apart before and was covered in electrical tape. > > So my question is, where's the best place place to source one? I've > tried eBay, Partsbandit and oldbikebarn, but no luck. Is there a > generic replacement part I can use? Will the ignition switch assembly > from other Nighthawks fit? > > It's for an '82 CB450SC, and I'm located in Vancouver, Canada. > > Thanks, > > - Chris > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
