*In this case black was the blinker and red was the running light. :)
**

Paul LeBoutillier *
*www.hondanighthawks.net*



On Thu, May 24, 2012 at 8:38 PM, Kurt Nolte <[email protected]>wrote:

> Was I right about the colors matching up?
>
> Kurt
> On May 24, 2012 10:37 PM, "Paul" <[email protected]> wrote:
>
>> *Okay, I finally got it figured out.*
>> *
>> *
>> *Definitely figured out which was the brighter of the two lights and I
>> believe they're working properly now. I ran into a situation where the key
>> would turn on the running lights, and turning on a signal would flash the
>> appropriate light BUT the opposite running light would go dark until the
>> blinker was shut off. Switched the two running light wires and that issue
>> is now resolved.*
>> *
>> *
>> *Now to tackle the rear signals. <sigh!> I have to pull off my sissy bar
>> and other stuff to get at the wiring and it's a BEAR to get it all back
>> together.
>> **
>>
>> Paul LeBoutillier *
>> *www.hondanighthawks.net*
>>
>>
>>
>> On Thu, May 24, 2012 at 6:48 PM, Kurt Nolte <[email protected]>wrote:
>>
>>> Either of the others will hold "on" as a running light (as the blinking
>>> is a function of the relay, not the terminal on the bulb), but one filament
>>> in the bulb is brighter than the other one. I can't remember which is
>>> which, soooo... I would be willing to bet, however, that RED is your turn
>>> signal and BLACK is your running light (brighter and dimmer filaments
>>> respectively)
>>>
>>> Kurt
>>>
>>> On Thu, May 24, 2012 at 8:36 PM, Paul <[email protected]> wrote:
>>>
>>>> *Okay, I think I might have figured a bit of this out but I want to
>>>> run it by you guys to check.*
>>>> *
>>>> *
>>>> *Black with White stripe is ground.*
>>>> *
>>>> *
>>>> *I've found that EITHER of the other wires blinks, which would mean
>>>> that either of those would you also remain on as a running light.*
>>>> *
>>>> *
>>>> *Sound correct?
>>>> **
>>>>
>>>> Paul LeBoutillier *
>>>> *www.hondanighthawks.net*
>>>>
>>>>
>>>>
>>>> On Thu, May 24, 2012 at 6:30 PM, Paul <[email protected]> wrote:
>>>>
>>>>> *I decided to install some new turn signals on my Magna, and go with
>>>>> a set that offered running lights in the front, even though Oregon doesn't
>>>>> require them.*
>>>>> *
>>>>> *
>>>>> *Anyway, the after-market signals I bought have three wires: red,
>>>>> black and a black with a white strip. These colors don't match the
>>>>> connections in the headlight bucket. Can anyone help me figure out the
>>>>> ground wire? After that I can determine the blinker wire from the running
>>>>> light wire.*
>>>>> *
>>>>> *
>>>>> *Thanks!
>>>>> *
>>>>> *
>>>>>
>>>>> Paul LeBoutillier *
>>>>> *www.hondanighthawks.net*
>>>>>
>>>>>
>>>>  --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "Nighthawk Motorcycle Lovers!" group.
>>>> To post to this group, send email to [email protected].
>>>> To unsubscribe from this group, send email to
>>>> [email protected].
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/nighthawk_lovers?hl=en.
>>>>
>>>
>>>  --
>>> You received this message because you are subscribed to the Google
>>> Groups "Nighthawk Motorcycle Lovers!" group.
>>> To post to this group, send email to [email protected].
>>> To unsubscribe from this group, send email to
>>> [email protected].
>>> For more options, visit this group at
>>> http://groups.google.com/group/nighthawk_lovers?hl=en.
>>>
>>
>>  --
>> You received this message because you are subscribed to the Google Groups
>> "Nighthawk Motorcycle Lovers!" group.
>> To post to this group, send email to [email protected].
>> To unsubscribe from this group, send email to
>> [email protected].
>> For more options, visit this group at
>> http://groups.google.com/group/nighthawk_lovers?hl=en.
>>
>  --
> You received this message because you are subscribed to the Google Groups
> "Nighthawk Motorcycle Lovers!" group.
> To post to this group, send email to [email protected].
> To unsubscribe from this group, send email to
> [email protected].
> For more options, visit this group at
> http://groups.google.com/group/nighthawk_lovers?hl=en.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/nighthawk_lovers?hl=en.

Reply via email to