Make sure the battery is good. We have seen plenty of weak batteries cause poor running conditions. Sent via BlackBerry by AT&T
-----Original Message----- From: "E.T." <[email protected]> Sender: [email protected] Date: Fri, 27 Jul 2012 17:48:50 To: <[email protected]> Reply-To: [email protected] Subject: Re: [Nighthawk Lovers] Re: No power/ stalling in low rpm. Any ideas? I'll check them out. Thanks After I switched the coils: running problem persists but the timing light showed regular firing for all 4 cylinders. I guess I'll switch back and retest. Decided just for the hell of it to check compression again. All cylinders are pushing 120psi which as far as I know should be plenty to run. I'm stumped here. I was supposed to be riding this machine to Texas here in 2 days, I really hope I can resolve this by then. -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To view this discussion on the web visit https://groups.google.com/d/msg/nighthawk_lovers/-/s8iR7SfTg6sJ. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en. -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
