I have two issues, actually. The bike is an '85 CB650SC Nighthawk. I recently acquired a nail in the rear tire so I went about putting on a new one. After this process my gauge light for the tail light is lit (red) and the light does not come on unless I depress the brake. Any idea what I did? I did have the 4 screws securing the rear body undone--could I be pinching a wire to cause this? The second issue is a bit stranger. My starter took a dive so I replaced it along with the solenoid and fuses. The bike starts great but when I fully depress the clutch, the bike goes to neutral. So if I'm in 5th and squeeze the clutch I go directly to neutral. Even stranger is that when I only depress the clutch half way, it goes back to that gear. I can cycle through gears normally but only when the clutch is halfway in. The second I squeeze all the way, I'm in neutral. What the hell is going on?!
-- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To view this discussion on the web visit https://groups.google.com/d/msg/nighthawk_lovers/-/9u2g9xMUrx8J. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
