You will only see the oring if you pull the metal ring out (has a slot in it for fluid level).
Sent from my iPhone > On Nov 17, 2014, at 9:34 PM, "mike21222 via Nighthawk Motorcycle Lovers!" > <[email protected]> wrote: > > Tommy, > I don't recall an O-Ring on my reservoir. Just glass and epoxy. I used 5 > Minute Epoxy as seen in the attached. I got it from an auto parts store. It's > the kind that mixes. I still have it and have reused it for other things. I > have seen multiple postings indicate that RTV sealant will also work. If I > were to do it again, I would probably just buy that product as it has more > other compatible uses. I have heard folks use black, I suggest using the > clear though, as a little overage of clear sealant on the glass will not even > draw notice, whereas black on the glass would. In my opinion anyway... If you > are going to start selling the product in kits, you might consider adding the > sealant in the kit. It can be done by simply loading a small syringe, say 1-3 > ml oral type syringe. But you would have to seal or cap it, to make sure the > sealant does not cure in the syringe, too much, or too long having access to > air will cause it to cure. I've also found a video I thought was pretty close > to what I did. > Here's that link. -> https://www.youtube.com/watch?v=F_yo3FnH6DM > BTW. I think a price of $50 will probably deter the discerning DIY kinda guy > and effectively limit your sales, it's my opinion that $25 is about tops for > what that's worth, and you would probably sell 3-5 times as many at that > price. But what do I know, I'm not the sales type. In any case. > Good Luck. > Mike > > -----Original Message----- > From: Tommy Hill <[email protected]> > To: nighthawk_lovers <[email protected]> > Sent: Mon, Nov 17, 2014 1:51 pm > Subject: Re: [Nighthawk Lovers] Clutch reservoir sight window > > Mike, did you use an o-ring or just the glass and epoxy? > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To unsubscribe from this group and stop receiving emails from it, send an > email > to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/nighthawk_lovers. > For more options, visit https://groups.google.com/d/optout. > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/nighthawk_lovers. > For more options, visit https://groups.google.com/d/optout. > <20141117_200347.jpg> > <80050.jpg> -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
