Hi Everyone, I picked up a 84 NH 550 recently which has been stored by previous owner for few tears. It needed a few repairs and I finally had it running but I am trying to figure out the problem with shifting. The hydraulic clutch sight glass had cracked and leaked out all the brake fluid (hydraulic fluid). I fixed it and bled the slave cylinder and I can put the tranny in gear but the output shaft doen't turn. When I spin the rear wheel by hand the output shaft is locked and turns as a unit. To look at ouput gear unit or transmission issues you have to remove the motor and split the cases. I really appreciate it if anyone can have suggestions as to what may be causing this issue before I have the pull the motor.
thanks, VEZ Ontario Canada -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
