Kurt, Yeah, sorry, but probably not going to happen anytime soon.
I scanned it at work, from the hard copy book. I'm limited on outbound email size - so I had to scale down the size for this original one. >From the conversation below (from Kyle) it looks like there's a good diagram going around. On Thursday, August 20, 2015 at 8:05:15 AM UTC-5, Kurt Nolte wrote: > > I collect and colorize those. Can you get me a high-DPI full size scan, > good and straight? > On Aug 20, 2015 8:20 AM, "Dashboard Viewfinder" <[email protected] > <javascript:>> wrote: > >> Here's the full wiring diagram if anyone needs it. >> I scaled it down from the shop manual. >> >> On Tuesday, August 18, 2015 at 4:59:58 PM UTC-5, Mike21222 wrote: >>> >>> I had issues with my rear turn signals once, troubleshot it as it was a >>> wiring issue, then some of the other lights started acting funny, then my >>> buddy suggested trying a fresh battery and that was the issue all along. >>> Seems sometimes the battery when its fading can cause erratic behavior in >>> some other things. I was surprised the bike would run, but the lights >>> wouldn't work properly with a bad battery. Anyway, good luck... >>> >>> >>> -----Original Message----- >>> From: Kurt Nolte <[email protected]> >>> To: nighthawk_lovers <[email protected]> >>> Sent: Tue, Aug 18, 2015 1:19 pm >>> Subject: Re: [Nighthawk Lovers] Conundrum with turn signals, relays, etc. >>> >>> No, that does not automatically mean a bad relay. >>> Relays don't "push" current. It's just a switch, it either lets current >>> pass or it doesn't. >>> If neither rear turn signal lights, check their ground wire. It should >>> be a ring terminal somewhere and a double bullet connector near the tail, >>> usually green or green striped wires. >>> The current path for a typical turn signal relay is >>> battery->relay->signal switch->lights->ground. >>> It is the turn signal switch that completes the circuit and in doing so >>> decides which side lights up. >>> If your relay works on one side and not the other, or you have front >>> signals but not rear, it is not the relay. >>> On Aug 18, 2015 12:48 PM, "Dashboard Viewfinder" < [email protected]> >>> wrote: >>> >>>> Checked all the bulbs, no filaments appear to be bad. >>>> Charged up battery over weekend, still showing same symptoms (only one >>>> side goes dark), but now the 3-pin relay (next to battery), does not do >>>> anything! >>>> >>>> So, taking the multimeter out, get good readings from switch (while >>>> instrument cluster is off). Headlight/Hi-beam switch works (still). >>>> Was not able to test signal from switch to instrument cluster yet. >>>> >>>> When the new relay comes in the mail, I'll update the group here. >>>> >>>> My thoughts are, if the signal is not getting to the rear at all (as >>>> in, it goes through the relay, then back out), then it's got to be a bad >>>> relay right? >>>> >>>> Thanks for the advice. >>>> >>>> On Monday, August 17, 2015 at 7:50:09 AM UTC-5, Allen wrote: >>>>> >>>>> Stupid question, but you did check the bulbs and their grounds first? >>>>> A bad bulb will make it so things don't flash. >>>>> Allen Thomas >>>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "Nighthawk Motorcycle Lovers!" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To post to this group, send email to [email protected]. >>>> Visit this group at http://groups.google.com/group/nighthawk_lovers. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Nighthawk Motorcycle Lovers!" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To post to this group, send email to [email protected]. >>> Visit this group at http://groups.google.com/group/nighthawk_lovers. >>> For more options, visit https://groups.google.com/d/optout. >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "Nighthawk Motorcycle Lovers!" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> To post to this group, send email to [email protected] >> <javascript:>. >> Visit this group at http://groups.google.com/group/nighthawk_lovers. >> For more options, visit https://groups.google.com/d/optout. >> > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
