That's actually from my old 650, so it's perfect for this situation. Just need to remove the contacts from their molex connectors and spread them out so they make more snug connections. On Oct 13, 2015 18:29, "Allen Thomas" <[email protected]> wrote:
> Hi Eddie, Welcome to the group. > > Unfortunately you have found the Achilles heel of the bike IMHO. You need > to remove the replacement fuse block, open it up and look for places where > I has shorted and repair them. > > While it is for a 700S model Kyle did a write up here: > http://nighthawk.kylemunz.com/?p=166 > > Also, you might want to pick up a can of electrical contact cleaner, and > some dielectric grease and give ALL the connections a good cleaning. Any > bike older than 10 years can probably use that done on its entire wire > harness, especially the stator,\regulator/rectifier (R/R), and common > ground connections. It is usually the first thing I do once I determine a > bike is going to be a runner. > > > On Tue, Oct 13, 2015 at 5:52 PM, Eddie Hoy <[email protected]> wrote: > >> Hi everyone bought a cb650sc nighthawk with burnt out well actually >> melted fuse box had to >> Buy new loom fuse box and ignition switch very hard to find parts for >> these bikes got bike >> Started but I still think fuse box where ignition switch plugs in still >> getting too hot anyone >> Got any ideas or had same problem >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Nighthawk Motorcycle Lovers!" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/nighthawk_lovers. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/nighthawk_lovers. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
