Doing some more documenting, but in the meantime, if anyone might be able to do me a favor....
Kyle traded me for his front cowling. The guy who bought the cowling off my bike before I bought the carcass took the mounting brackets for the cowling. Took me forever to figure out how it's supposed to mount, since the bracket it mounts to has bolts going in 90 degrees from where the cowling bolts are. The service manual doesn't really show that in the assembly blowout. Found an interior shot of someone else's cowling for reference... If anyone would mind taking those measurements for me, I'd appreciate it so I can fabricate my own brackets from some scrap steel. A - If you square up along the center lines of the two mounting bolts, how far between the second one and the 90 degree bend? B - How long is the bend? C - If you square up along the center lines of the two mounting bolts, how far is the offset to the center of the 90-degree bolt? Bonus: https://www.youtube.com/watch?v=6nUDLOZH9Ys -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
