After a few hours of research and trial and error, I'm still having issues.
I'm assembling it exactly as I see others are. When in "off" it functions correctly. Nothing comes out. When in the "on" or "res" position, everything is fine as well. But when I start it up, fuel gushes out of the cracks in between the second plate and the larger assembly. I believe the new smaller diaphragm is not sealing well with the second plate. So when it opens, to let fuel flow from the straw to the strainer reservoir, fuel slips between and out. As far as I can tell the small diaphragm is exactly as it should be. I tried grinding down the pins on the second plate, so the screws could tighten down more, forcing the small diaphragm to form a better seal. But to no avail. -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
