Once you have the band very loose, then just pry them off. BTW. It's easier to leave the intake boots on the motor and then pull the carb bank out of the intake boots.
On Sunday, February 3, 2019 at 12:43:52 PM UTC-6, roidfingers wrote: > > Phillip head screw driver. Just like the other side. metal band wraps > around it. > > On Sunday, February 3, 2019 at 12:19:18 PM UTC-6, Holger Selover-Stephan > wrote: >> >> Hi, >> >> I took off the carburetor on the '83 650 to clean it, and to install new >> throttle cables. But I haven't figured out how to remove the rubber (if >> they are rubber) boots from the cylinder side. See picture. Removing the >> hose clamp didn't help. They rotate but I can't pull them off. Any ideas? >> Thanks! >> >> Holger >> >> [image: carburetor.jpg] >> >> -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
