Andrew Farnsworth wrote:
> Showing my ignorance here, 

No worries... I'm far more ignorant that you, as I'm surely about to 
prove.  LOL

>but what is Access Point mode?  Where the adapter
> will work as an Access Point rather than a client?

Yes, I think so.

>  I thought this was all software rather than hardware related.

Right, but my assumption is that the issue is that the firmware or 
driver isn't written to provide that functionality.  Or maybe it's a 
combination of hardware and software required for the various modes? 
Most likely, I have no idea what I'm talking about and haven't slept 
enough to realize that I'm babbling?  heh heh  :-)

Who knows... perhaps I don't need AP mode, and Ad-Hoc mode will work? 
The desired end result is to have a few clients connect to the server 
(which has the card in question) so that the server can stream video to 
the clients.

OK, I just found the following at the D-link site...
http://www.dlink.com.au/tech/faq/wireless/Wireless_FAQ_General.htm

----------------------
What is an Access Point?
An access point is a bridging device for connecting a wired and wireless 
network together. Access points are typically wireless routers or 
stand-alone devices that plug into an Ethernet hub, switch, or router.

What is Ad-hoc mode?
Set of 802.11b wireless stations that communicate directly with one 
another without using an access point or any connection to a wired network.
---------------------

So, for this particular project, I should be able to get by with Ad-Hoc 
mode and one of the machines setup as a DHCP server... right?


Thanks for asking, Andy... I just learned something that I should have 
figured out before asking my original question.  LOL

JMJ

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"NLUG" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/nlug-talk?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to