Paolo: I reviewed my NONMEM 7.4 testing results on CWRESI, and they provide the same values in NONMEM 7.3 as well as NONMEM 7.4. In case you ran the problem in parallel, because NONMEM 7.4 now executes the diagnostic evaluation in parallel as well, I tested under parallel execution conditions, and the CWRESI values are also the same between NONMEM 7.4 (parallel) and NONMEM 7.3. Incidentally, as a diagnostic that is expected to be normally distributed when the model is correct, CWRES is preferred even when INTERACTION is used in the $EST step.
I would be happy to run your problem and see if I can detect something more subtle that is involved in your case. Robert J. Bauer, Ph.D. Senior Director Pharmacometrics R&D ICON Early Phase 820 W. Diamond Avenue Suite 100 Gaithersburg, MD 20878 Office: (215) 616-6428 Mobile: (925) 286-0769 [email protected]<mailto:[email protected]> www.iconplc.com<http://www.iconplc.com/> <br /><br /> ICON plc made the following annotations. ------------------------------------------------------------------------------ This e-mail transmission may contain confidential or legally privileged information that is intended only for the individual or entity named in the e-mail address. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or reliance upon the contents of this e-mail is strictly prohibited. If you have received this e-mail transmission in error, please reply to the sender, so that ICON plc can arrange for proper delivery, and then please delete the message. Thank You, ICON plc South County Business Park Leopardstown Dublin 18 Ireland Registered number: 145835
