github-actions[bot] commented on PR #6492: URL: https://github.com/apache/texera/pull/6492#issuecomment-5005844704
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 4 better · 🔴 3 worse · ⚪ 8 noise (<±5%) · 0 without baseline > Compared against main `f722c26` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/29600292781) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 378 | 0.231 | 25,880/31,565/31,565 us | 🔴 +17.2% / 🔴 +119.8% | | 🟢 | bs=100 sw=10 sl=64 | 798 | 0.487 | 125,439/137,098/137,098 us | 🟢 -8.5% / 🔴 +38.3% | | ⚪ | bs=1000 sw=10 sl=64 | 914 | 0.558 | 1,095,829/1,122,216/1,122,216 us | ⚪ within ±5% / 🔴 +20.4% | <details><summary>Baseline details</summary> Latest main `f722c26` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 378 tuples/sec | 407 tuples/sec | 831.47 tuples/sec | -7.1% | -54.5% | | bs=10 sw=10 sl=64 | MB/s | 0.231 MB/s | 0.249 MB/s | 0.507 MB/s | -7.2% | -54.5% | | bs=10 sw=10 sl=64 | p50 | 25,880 us | 22,075 us | 11,844 us | +17.2% | +118.5% | | bs=10 sw=10 sl=64 | p95 | 31,565 us | 35,454 us | 14,359 us | -11.0% | +119.8% | | bs=10 sw=10 sl=64 | p99 | 31,565 us | 35,454 us | 18,888 us | -11.0% | +67.1% | | bs=100 sw=10 sl=64 | throughput | 798 tuples/sec | 809 tuples/sec | 1,089 tuples/sec | -1.4% | -26.7% | | bs=100 sw=10 sl=64 | MB/s | 0.487 MB/s | 0.494 MB/s | 0.665 MB/s | -1.4% | -26.7% | | bs=100 sw=10 sl=64 | p50 | 125,439 us | 121,919 us | 92,503 us | +2.9% | +35.6% | | bs=100 sw=10 sl=64 | p95 | 137,098 us | 149,831 us | 99,121 us | -8.5% | +38.3% | | bs=100 sw=10 sl=64 | p99 | 137,098 us | 149,831 us | 112,422 us | -8.5% | +21.9% | | bs=1000 sw=10 sl=64 | throughput | 914 tuples/sec | 919 tuples/sec | 1,117 tuples/sec | -0.5% | -18.2% | | bs=1000 sw=10 sl=64 | MB/s | 0.558 MB/s | 0.561 MB/s | 0.682 MB/s | -0.5% | -18.2% | | bs=1000 sw=10 sl=64 | p50 | 1,095,829 us | 1,091,889 us | 910,046 us | +0.4% | +20.4% | | bs=1000 sw=10 sl=64 | p95 | 1,122,216 us | 1,114,478 us | 950,716 us | +0.7% | +18.0% | | bs=1000 sw=10 sl=64 | p99 | 1,122,216 us | 1,114,478 us | 985,832 us | +0.7% | +13.8% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,529.03,200,128000,378,0.231,25879.56,31565.06,31565.06 1,100,10,64,20,2505.23,2000,1280000,798,0.487,125439.12,137097.54,137097.54 2,1000,10,64,20,21884.60,20000,12800000,914,0.558,1095829.23,1122216.08,1122216.08 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
