github-actions[bot] commented on PR #7452: URL: https://github.com/apache/texera/pull/7452#issuecomment-5231413583
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 0 better · 🔴 6 worse · ⚪ 9 noise (<±5%) · 0 without baseline > Compared against main `e03d971` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/31312035601) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 376 | 0.229 | 27,068/37,552/37,552 us | 🔴 +15.3% / 🔴 +133.0% | | 🔴 | bs=100 sw=10 sl=64 | 777 | 0.474 | 128,531/158,524/158,524 us | 🔴 +6.6% / 🔴 +42.5% | | ⚪ | bs=1000 sw=10 sl=64 | 912 | 0.556 | 1,091,646/1,151,546/1,151,546 us | ⚪ within ±5% / 🔴 +8.4% | <details><summary>Baseline details</summary> Latest main `e03d971` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 376 tuples/sec | 398 tuples/sec | 752.25 tuples/sec | -5.5% | -50.0% | | bs=10 sw=10 sl=64 | MB/s | 0.229 MB/s | 0.243 MB/s | 0.459 MB/s | -5.8% | -50.1% | | bs=10 sw=10 sl=64 | p50 | 27,068 us | 23,470 us | 13,006 us | +15.3% | +108.1% | | bs=10 sw=10 sl=64 | p95 | 37,552 us | 37,192 us | 16,117 us | +1.0% | +133.0% | | bs=10 sw=10 sl=64 | p99 | 37,552 us | 37,192 us | 19,286 us | +1.0% | +94.7% | | bs=100 sw=10 sl=64 | throughput | 777 tuples/sec | 826 tuples/sec | 953.66 tuples/sec | -5.9% | -18.5% | | bs=100 sw=10 sl=64 | MB/s | 0.474 MB/s | 0.504 MB/s | 0.582 MB/s | -6.0% | -18.6% | | bs=100 sw=10 sl=64 | p50 | 128,531 us | 120,577 us | 105,130 us | +6.6% | +22.3% | | bs=100 sw=10 sl=64 | p95 | 158,524 us | 152,161 us | 111,226 us | +4.2% | +42.5% | | bs=100 sw=10 sl=64 | p99 | 158,524 us | 152,161 us | 121,065 us | +4.2% | +30.9% | | bs=1000 sw=10 sl=64 | throughput | 912 tuples/sec | 917 tuples/sec | 984.25 tuples/sec | -0.5% | -7.3% | | bs=1000 sw=10 sl=64 | MB/s | 0.556 MB/s | 0.56 MB/s | 0.601 MB/s | -0.7% | -7.4% | | bs=1000 sw=10 sl=64 | p50 | 1,091,646 us | 1,085,417 us | 1,024,295 us | +0.6% | +6.6% | | bs=1000 sw=10 sl=64 | p95 | 1,151,546 us | 1,185,028 us | 1,062,710 us | -2.8% | +8.4% | | bs=1000 sw=10 sl=64 | p99 | 1,151,546 us | 1,185,028 us | 1,095,400 us | -2.8% | +5.1% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,532.11,200,128000,376,0.229,27068.39,37551.70,37551.70 1,100,10,64,20,2574.97,2000,1280000,777,0.474,128531.45,158524.01,158524.01 2,1000,10,64,20,21940.33,20000,12800000,912,0.556,1091646.25,1151545.56,1151545.56 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
