Although the dev_xx!() macro calls do not technically require terminating newlines for the format strings, they should be added anyway to maintain consistency, both within Rust code and with the C versions.
Signed-off-by: Timur Tabi <[email protected]> --- v2: added some more strings that were missed drivers/gpu/nova-core/falcon.rs | 6 +++--- drivers/gpu/nova-core/falcon/hal/ga102.rs | 4 ++-- drivers/gpu/nova-core/fb.rs | 2 +- drivers/gpu/nova-core/gpu.rs | 2 +- drivers/gpu/nova-core/gsp/boot.rs | 2 +- drivers/gpu/nova-core/gsp/cmdq.rs | 2 +- drivers/gpu/nova-core/gsp/sequencer.rs | 10 +++++----- drivers/gpu/nova-core/vbios.rs | 2 +- 8 files changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/nova-core/falcon.rs b/drivers/gpu/nova-core/falcon.rs index 6ae0490caffa..4e1da0b9cf4f 100644 --- a/drivers/gpu/nova-core/falcon.rs +++ b/drivers/gpu/nova-core/falcon.rs @@ -466,7 +466,7 @@ fn dma_wr<F: FalconFirmware<Target = E>>( if dma_start % DmaAddress::from(DMA_LEN) > 0 { dev_err!( self.dev, - "DMA transfer start addresses must be a multiple of {}", + "DMA transfer start addresses must be a multiple of {}\n", DMA_LEN ); return Err(EINVAL); @@ -489,11 +489,11 @@ fn dma_wr<F: FalconFirmware<Target = E>>( .and_then(|size| size.checked_add(load_offsets.src_start)) { None => { - dev_err!(self.dev, "DMA transfer length overflow"); + dev_err!(self.dev, "DMA transfer length overflow\n"); return Err(EOVERFLOW); } Some(upper_bound) if usize::from_safe_cast(upper_bound) > fw.size() => { - dev_err!(self.dev, "DMA transfer goes beyond range of DMA object"); + dev_err!(self.dev, "DMA transfer goes beyond range of DMA object\n"); return Err(EINVAL); } Some(_) => (), diff --git a/drivers/gpu/nova-core/falcon/hal/ga102.rs b/drivers/gpu/nova-core/falcon/hal/ga102.rs index 69a7a95cac16..0bdfe45a2d03 100644 --- a/drivers/gpu/nova-core/falcon/hal/ga102.rs +++ b/drivers/gpu/nova-core/falcon/hal/ga102.rs @@ -52,7 +52,7 @@ fn signature_reg_fuse_version_ga102( let ucode_idx = match usize::from(ucode_id) { ucode_id @ 1..=regs::NV_FUSE_OPT_FPF_SIZE => ucode_id - 1, _ => { - dev_err!(dev, "invalid ucode id {:#x}", ucode_id); + dev_err!(dev, "invalid ucode id {:#x}\n", ucode_id); return Err(EINVAL); } }; @@ -66,7 +66,7 @@ fn signature_reg_fuse_version_ga102( } else if engine_id_mask & 0x0400 != 0 { regs::NV_FUSE_OPT_FPF_GSP_UCODE1_VERSION::read(bar, ucode_idx).data() } else { - dev_err!(dev, "unexpected engine_id_mask {:#x}", engine_id_mask); + dev_err!(dev, "unexpected engine_id_mask {:#x}\n", engine_id_mask); return Err(EINVAL); }; diff --git a/drivers/gpu/nova-core/fb.rs b/drivers/gpu/nova-core/fb.rs index 3c9cf151786c..c62abcaed547 100644 --- a/drivers/gpu/nova-core/fb.rs +++ b/drivers/gpu/nova-core/fb.rs @@ -80,7 +80,7 @@ pub(crate) fn unregister(&self, bar: &Bar0) { let _ = hal.write_sysmem_flush_page(bar, 0).inspect_err(|e| { dev_warn!( &self.device, - "failed to unregister sysmem flush page: {:?}", + "failed to unregister sysmem flush page: {:?}\n", e ) }); diff --git a/drivers/gpu/nova-core/gpu.rs b/drivers/gpu/nova-core/gpu.rs index 50d76092fbdd..9b042ef1a308 100644 --- a/drivers/gpu/nova-core/gpu.rs +++ b/drivers/gpu/nova-core/gpu.rs @@ -268,7 +268,7 @@ pub(crate) fn new<'a>( // We must wait for GFW_BOOT completion before doing any significant setup on the GPU. _: { gfw::wait_gfw_boot_completion(bar) - .inspect_err(|_| dev_err!(pdev.as_ref(), "GFW boot did not complete"))?; + .inspect_err(|_| dev_err!(pdev.as_ref(), "GFW boot did not complete\n"))?; }, sysmem_flush: SysmemFlush::register(pdev.as_ref(), bar, spec.chipset)?, diff --git a/drivers/gpu/nova-core/gsp/boot.rs b/drivers/gpu/nova-core/gsp/boot.rs index a53d80620468..da21447be663 100644 --- a/drivers/gpu/nova-core/gsp/boot.rs +++ b/drivers/gpu/nova-core/gsp/boot.rs @@ -82,7 +82,7 @@ fn run_fwsec_frts( if frts_status != 0 { dev_err!( dev, - "FWSEC-FRTS returned with error code {:#x}", + "FWSEC-FRTS returned with error code {:#x}\n", frts_status ); diff --git a/drivers/gpu/nova-core/gsp/cmdq.rs b/drivers/gpu/nova-core/gsp/cmdq.rs index 6f946d14868a..3c01fc6e6b6a 100644 --- a/drivers/gpu/nova-core/gsp/cmdq.rs +++ b/drivers/gpu/nova-core/gsp/cmdq.rs @@ -615,7 +615,7 @@ fn wait_for_msg(&self, timeout: Delta) -> Result<GspMessage<'_>> { { dev_err!( self.dev, - "GSP RPC: receive: Call {} - bad checksum", + "GSP RPC: receive: Call {} - bad checksum\n", header.sequence() ); return Err(EIO); diff --git a/drivers/gpu/nova-core/gsp/sequencer.rs b/drivers/gpu/nova-core/gsp/sequencer.rs index d78a30fbb70f..d6c489c39092 100644 --- a/drivers/gpu/nova-core/gsp/sequencer.rs +++ b/drivers/gpu/nova-core/gsp/sequencer.rs @@ -121,7 +121,7 @@ pub(crate) fn new(data: &[u8], dev: &device::Device) -> Result<(Self, usize)> { }; if data.len() < size { - dev_err!(dev, "Data is not enough for command"); + dev_err!(dev, "Data is not enough for command\n"); return Err(EINVAL); } @@ -320,7 +320,7 @@ fn next(&mut self) -> Option<Self::Item> { cmd_result.map_or_else( |_err| { - dev_err!(self.dev, "Error parsing command at offset {}", offset); + dev_err!(self.dev, "Error parsing command at offset {}\n", offset); None }, |(cmd, size)| { @@ -382,7 +382,7 @@ pub(crate) fn run(cmdq: &mut Cmdq, params: GspSequencerParams<'a>) -> Result { dev: params.dev, }; - dev_dbg!(sequencer.dev, "Running CPU Sequencer commands"); + dev_dbg!(sequencer.dev, "Running CPU Sequencer commands\n"); for cmd_result in sequencer.iter() { match cmd_result { @@ -390,7 +390,7 @@ pub(crate) fn run(cmdq: &mut Cmdq, params: GspSequencerParams<'a>) -> Result { Err(e) => { dev_err!( sequencer.dev, - "Error running command at index {}", + "Error running command at index {}\n", sequencer.seq_info.cmd_index ); return Err(e); @@ -400,7 +400,7 @@ pub(crate) fn run(cmdq: &mut Cmdq, params: GspSequencerParams<'a>) -> Result { dev_dbg!( sequencer.dev, - "CPU Sequencer commands completed successfully" + "CPU Sequencer commands completed successfully\n" ); Ok(()) } diff --git a/drivers/gpu/nova-core/vbios.rs b/drivers/gpu/nova-core/vbios.rs index 7c26e4a2d61c..e4eae9385f47 100644 --- a/drivers/gpu/nova-core/vbios.rs +++ b/drivers/gpu/nova-core/vbios.rs @@ -790,7 +790,7 @@ fn falcon_data_ptr(&self) -> Result<u32> { // read the 4 bytes at the offset specified in the token let offset = usize::from(token.data_offset); let bytes: [u8; 4] = self.base.data[offset..offset + 4].try_into().map_err(|_| { - dev_err!(self.base.dev, "Failed to convert data slice to array"); + dev_err!(self.base.dev, "Failed to convert data slice to array\n"); EINVAL })?; -- 2.52.0
