I'm afraid I don't have an immediate answer as I haven't used the messenger from c++, and I can't think right now of a c++ that does, for reference.
On Tue, Dec 20, 2011 at 1:09 AM, Harshil Anil Kumar Shah < harshil_s...@infosys.com> wrote: > Hi,**** > > In my case where external module is C++ then can I use “pyobject” to > interact with python module?**** > > ** ** > > *From:* Harshil Anil Kumar Shah > *Sent:* Monday, December 19, 2011 3:32 PM > *To:* 'Kyriakos Zarifis' > *Cc:* nox-dev@noxrepo.org > *Subject:* RE: [nox-dev] Nox messenger example for external c++ and nox > python**** > > ** ** > > Thanks Zarifis…**** > > ** ** > > I looked at GUI example. It seems very useful. But in my case, client is > external C++ module. So in that case do I have to use use messenger.cpp??* > *** > > ** ** > > -Harshil.**** > > ** ** > > *From:* nox-dev-boun...@noxrepo.org [mailto:nox-dev-boun...@noxrepo.org] *On > Behalf Of *Kyriakos Zarifis > > *Sent:* Monday, December 19, 2011 1:38 PM > *To:* Harshil Anil Kumar Shah > *Cc:* nox-dev@noxrepo.org > *Subject:* Re: [nox-dev] Nox messenger example for external c++ and nox > python**** > > ** ** > > Hi Harshil,**** > > ** ** > > it might not be the simplest example, but the GUI communicates with NOX > using the messenger, so taking a look at that code might be a good starting > point.**** > > ** ** > > Specifically, the file communication.py is responsible on the GUI side. > Similarly on the NOX side, the code that uses the messenger to send > messages to the GUI is inside the respective component that talks to the > GUI. The component "monitoring" is one of them.**** > > > Some of this is documented on the wiki here:**** > > > http://noxrepo.org/noxwiki/index.php/NOX_GUI#Connecting_a_subview_to_a_NOX_component > **** > > On Sun, Dec 18, 2011 at 10:41 PM, Harshil Anil Kumar Shah < > harshil_s...@infosys.com> wrote:**** > > Hi,**** > > **** > > I want to exchange messages between external C++ module and python module > in Nox using protobuf messages. I browsed through couple of posts, I > figured out I can use coreapps/messenger. Can I get some working example > how messenger code can be used for message exchange between external c++ > and nox python module.**** > > **** > > *Regards,***** > > *Harshil Shah,***** > > Convergence Lab, Infosys Labs**** > > Infosys | Bangalore**** > > *Mob #** : +91 97428 87966.***** > > **** > > **************** CAUTION - Disclaimer ********************* > > This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely > **** > > for the use of the addressee(s). If you are not the intended recipient, > please **** > > notify the sender by e-mail and delete the original message. Further, you are > not **** > > to copy, disclose, or distribute this e-mail or its contents to any other > person and **** > > any such actions are unlawful. This e-mail may contain viruses. Infosys has > taken **** > > every reasonable precaution to minimize this risk, but is not liable for any > damage **** > > you may sustain as a result of any virus in this e-mail. You should carry out > your **** > > own virus checks before opening the e-mail or attachment. Infosys reserves > the **** > > right to monitor and review the content of all messages sent to or from this > e-mail **** > > address. Messages sent to or from this e-mail address may be stored on the > **** > > Infosys e-mail system.**** > > ***INFOSYS******** End of Disclaimer ********INFOSYS******* > > > _______________________________________________ > nox-dev mailing list > nox-dev@noxrepo.org > http://noxrepo.org/mailman/listinfo/nox-dev**** > > ** ** >
_______________________________________________ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev
