Bob, Thank you very much for replying. On both devices the picturebox pixel addressing in NSB is 320x240 and the rest of the drawing works fine (i.e. lines, etc). Also the jam is 320x240 and the text looks the same on that as the g900. Hence I'm a bit confused as to how to set the font size to be consistent between devices.
Best wishes, Andrew. -----Original Message----- From: Bob Katayama <[EMAIL PROTECTED]> Sent: 28 September 2008 22:45 To: [EMAIL PROTECTED] Subject: RE: [nsbasic-ce] Picturebox font size problem Just from reading what you have posted, the HP HX2790 screen has a 320 X 240 resolution and the Toshiba g900 has an 800 X 480 resolution. Therefore the text will be smaller on the HP HX2790 if the font size is hard coded and variable depending on screen resolution. Bob From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Andrew Thomas Sent: Sunday, September 28, 2008 5:39 PM To: NSB CE Yahoo Group Subject: [nsbasic-ce] Picturebox font size problem Hi, I'm having a problem with the picturebox control and wondered if anyone can help. I have a non-commercial program and have tested it on a Toshiba g900 and an old imate jam. On both I get sensible text sizes using graph.fontsize=9 (and even without this setting). However, a user has used the program on a HP HX2790 and he gets very small text, maybe half the size, but in the correct position (i.e. not a resolution problem). Is anyone able to tell me how to get around this? Many thanks in advance. Andrew. [The entire original message is not included] --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "nsb-ce" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/nsb-ce?hl=en -~----------~----~----~----~------~----~------~--~---
