Ok, so I CAN get a 9g for the 3rd. Now, if I replace each one of the 4.3g with a 9g over time, will it eventually convert to 9g when all are changed or must the raid config program be rerun - which means reinstall possibly?
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Roger Wright Sent: Wednesday, March 20, 2002 5:32 PM To: NT 2000 Discussions Subject: RE: 3rd Drive in array - can it be replaced with larger? When replacing a drive in a RAID5 array with a larger drive you will only realize the capacity of the original drive. Roger Wright Southern Commerce Bank ___ Take care of the luxuries and the necessities will take care of themselves. -----Original Message----- From: Ron Jameson [mailto:[EMAIL PROTECTED]] Sent: Wednesday, March 20, 2002 6:24 PM To: NT 2000 Discussions Subject: 3rd Drive in array - can it be replaced with larger? Here is a question I am pretty sure will not work, but wish to confirm. I have a DEC Server with the storage works RAID 5 array on a triple bus mylex (dec branded) controller. One of the drives needs replacing and it is currently a 4.3g drive. I can replace with the same for $100.00 or so and hot swap for data regeneration, but is there a way to instead get a 9g drive and hot swap into the array? Then, if/when the other 4.3g drives go, I can replace with the 9g to get more space when all 3 have finally been replaced? Ron _______ NOTICE: The information contained in this electronic message is considered privileged and confidential under Florida Statutes 455.251 and 3905.017. It is intended solely for the use of the recipient named above. If the reader is not the recipient named above, you are hereby notified that any dissemination, distribution, copying or disclosure of the contents of this message is prohibited. If you have received this e-mail message in error, please immediately notify the sender and destroy the original message. ------ You are subscribed as [EMAIL PROTECTED] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to %%email.unsub%% ------ You are subscribed as [email protected] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to [EMAIL PROTECTED]
