It sounds like you didn't have both ends configured the same - ie both set
to EtherChannel

--------------------------------------------------------------
Roger D. Seielstad - MTS MCSE MS-MVP
Sr. Systems Administrator
Inovis Inc.


> -----Original Message-----
> From: Henderson Richard [mailto:[EMAIL PROTECTED] 
> Sent: Friday, July 18, 2003 3:51 AM
> To: NT 2000 Discussions
> Subject: RE: Teaming NIC
> 
> 
> About 18 months ago this was looked at & found that teaming 
> worked on one
> end or the other, not both.  If the Cisco switch 5500 was 
> setup to load
> balance the sys log would fill up with entry's relating to 
> assigning the
> server's teamed mac address,  i.e. the switch kept 
> alternating which port it
> assigned the Compaq team mac address too. Consequently we set 
> it up on the
> servers but not the switch.   Anyone else experienced this behavior ?
> 
> -----Original Message-----
> From: [EMAIL PROTECTED] 
> [mailto:[EMAIL PROTECTED] 
> Sent: 17 July 2003 22:26
> To: NT 2000 Discussions
> Subject: Re: Teaming NIC
> 
> 
> IOS Based:
> 
> port-channel load-balance src-mac
> !
> interface FastEthernet0/1
>   description Exchange Server EtherChannel
>   port group 2
>   spanning-tree portfast
>   duplex full
>   speed 100
> !
> interface FastEthernet0/2
>   description Exchange Server EtherChannel
>   port group 2
>   spanning-tree portfast
>   duplex full
>   speed 100
> 
> 
> If you have a set based switch  CatOS it a bit different.  If 
> so' let me
> know.
> 
> At 11:12 7/17/2003, Pham, Tuan wrote:
> >When I'm using Compaq Team NIC to get double the 
> size(2x100Full), do I
> >need to do anything at the switch(Cisco)?
> 
> 
> 
> 
> ------
> You are subscribed as [EMAIL PROTECTED]
> Web Interface:
> http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=nt2000&tex
t_mode=&lang=e
nglish
To unsubscribe send a blank email to %%email.unsub%%


****************************************************************************
*******************************
This correspondence is confidential and is solely for the intended
recipient(s). If you are not the intended recipient, you must not use,
disclose, copy, distribute or retain this message or any part of it. If you
are not the intended recipient please delete this correspondence from your
system and notify the sender immediately.
No warranty is given that this correspondence is free from any virus. In
keeping with good computer practice, you should ensure that it is actually
virus free. E-mail messages may be subject to delays, non-delivery and
unauthorised alterations therefore, information expressed in this message is
not given or endorsed by Sx3 unless otherwise notified by our duly
authorised representative independent of this message.
Sx3 is a trading name of Service and Systems Solutions Limited, a limited
company registered in Northern Ireland under number NI 32979 whose
registered office is at 120 Malone Road, Belfast, BT9 5HT.
****************************************************************************
*******************************


------
You are subscribed as [EMAIL PROTECTED]
Web Interface:
http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=nt2000&text_mode=&lang=e
nglish
To unsubscribe send a blank email to %%email.unsub%%

------
You are subscribed as [EMAIL PROTECTED]
Web Interface: 
http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=nt2000&text_mode=&lang=english
To unsubscribe send a blank email to [EMAIL PROTECTED]

Reply via email to