currently I have a Cisco 2651 with Dual ethernet ports and 2 T-1's connected to it one is our primary connection and the other is our backup that we want to failover to.. we were going to use BGP, but it turns out that our secondary T doesn't have an AS# registered to it.. our biggest problem is when the primary T goes down and I change the gateway on the router to the other T.. outbound is fine, but how do I get it so DNS will translate to my critical servers on the second line... is this something that Dynamic DNS could accomplish?? *************************************************************************** The information contained in this message is intended only for the confidential use of the recipient(s) named above. This message is privileged and confidential. If the reader of this message is not the intended recipient or any agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify us immediately. SMG reserves the right to monitor and review all content sent to and from this email address. Messages sent to and from this address may be stored on the SMG email system.
------ You are subscribed as [EMAIL PROTECTED] Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=nt2000&text_mode=&lang=english To unsubscribe send a blank email to [EMAIL PROTECTED]
